ADG658YRQ
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 75Ohm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 10μW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG658 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Channels | 8 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Power Dissipation | 10μW |
| Throw Configuration | DPST |
| Voltage - Supply, Single/Dual (±) | 2V~12V ±2V~6V |
| Bandwidth | 210MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 30 ns |
| Max Dual Supply Voltage | 6V |
| On-State Resistance (Max) | 75Ohm |
| Min Dual Supply Voltage | 2V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 90 dB |
| Current - Leakage (IS(off)) (Max) | 200pA |
| Channel Capacitance (CS(off), CD(off)) | 4pF 23pF |
| On-state Resistance Match-Nom | 1.3Ohm |
| Switch Time (Ton, Toff) (Max) | 115ns, 45ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 1.3 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 55ns |
| Signal Current-Max | 0.02A |
| Length | 4.9022mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ADG658YRQ Overview
The electronic component is convenient to ship overseas because it is packed in a 16-SSOP (0.154, 3.90mm Width). Advanced packaging method Tube is used to provide high reliability. A switch device like this is mounted in Surface Mount. 8:1 is the number of circuits in the multiplexer and demultiplexer. Extended operating temperature around -40°C~125°C TA. Total terminations are 16. High-quality output is provided by the electronic component's 8 channels. With a 5V voltage supply, the electrical component should be turned on and run. There is an electrical component included in the 16 series. The multiplexer consists of 1 circuits. Look for analog switch ic variants by searching with ADG658. In this multiplexer, the internal resistance is 75Ohm. For functions related to 16 pins, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. Users shouldn't supply more than 12V voltage to the switch device. 2V should be the lowest voltage fed to the electronic component. Despite this switch device's dual supply capability, its voltage should not exceed 6V. If you are using a dual power supply, you should attach at least 2V. With a SINGLE-ENDED MULTIPLEXER analog IC integrated into the board. Operating voltages of 5V are compatible with the electrical part. The data can be transferred over a wide range of bandwidths, called 210MHz bandwidths.
ADG658YRQ Features
8 Channels
Bandwidth: 210MHz
ADG658YRQ Applications
There are a lot of Analog Devices Inc. ADG658YRQ Analog Switches & Multiplexers ICs applications.
- Audio/video switches
- Channelized and Unchannelized DS3 applications
- Fiber to the Home
- Sample-and-hold systems
- Multiplexers
- Communication systems
- Data Acquisition Systems
- E1 Multiplexer
- Avionics test equipment
- T1/E1 Terminals
