ADG658YRQ-REEL
| Parameters | |
|---|---|
| Base Part Number | ADG658 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Power Dissipation | 10μW |
| Voltage - Supply, Single/Dual (±) | 2V~12V ±2V~6V |
| Bandwidth | 210MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 30 ns |
| Max Dual Supply Voltage | 6V |
| On-State Resistance (Max) | 75Ohm |
| Min Dual Supply Voltage | 2V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 90 dB |
| Current - Leakage (IS(off)) (Max) | 200pA |
| Channel Capacitance (CS(off), CD(off)) | 4pF 23pF |
| On-state Resistance Match-Nom | 1.3Ohm |
| Switch Time (Ton, Toff) (Max) | 115ns, 45ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 1.3 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 55ns |
| Signal Current-Max | 0.02A |
| Length | 4.9022mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 75Ohm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 10μW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
ADG658YRQ-REEL Overview
This electronic part is conveniently packaged in 16-SSOP (0.154, 3.90mm Width), making it easy to ship abroad. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. This analog switch is mounted in Surface Mount. Multiplexer and demultiplexer circuits have a number 8:1. Increasing operating temperature to around -40°C~125°C TA. In total, there are 16 terminations. A electrical component with 8 channels is capable of high-quality output. Turning on and running the electrical part should be easy with a 5V voltage supply. As part of the design of the 16 series, this electronic part has been incorporated into the system. There are 1 circuits in this switch device. Try searching for the analog switch ic with ADG658 if you are looking for variants. It has an internal resistance of 75Ohm. Please refer to the datasheets for 16 pins functions. A analogue multiplexer of this type is a Multiplexer or Switches. In normalcircumstances, users should not exceed 12V volts for the multiplexer. 2V is the lowest voltage that should be fed to the electronic electronic part. For this multiplexer, dual supply voltage is feasible, but it should not exceed 6V. If you are using dual power supplies, you should attach at least 2V. It is integrated with a SINGLE-ENDED MULTIPLEXER analog IC. It can operate from 5V operating voltages. The data can be transferred over a wide range of bandwidths, called 210MHz bandwidths.
ADG658YRQ-REEL Features
8 Channels
Bandwidth: 210MHz
ADG658YRQ-REEL Applications
There are a lot of Analog Devices Inc. ADG658YRQ-REEL Analog Switches & Multiplexers ICs applications.
- CSU
- Fiber In The Loop (FITL)
- Microprocessor controlled systems
- Cross Connects
- Fiber to the Home
- Automatic test equipment
- 65 V DACs
- MP3 players
- Avionics
- ATM
