ADG658YRQ-REEL7
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 75Ohm |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG658 |
| Pin Count | 16 |
| Operating Supply Voltage | 9V |
| Power Supplies | 3/5/+-5V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Throw Configuration | DPST |
| Propagation Delay | 115 ns |
| Turn On Delay Time | 370 ns |
| Voltage - Supply, Single/Dual (±) | 2V~12V ±2V~6V |
| Supply Type | Dual, Single |
| Bandwidth | 210MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 80 ns |
| Max Dual Supply Voltage | 6V |
| On-State Resistance (Max) | 75Ohm |
| Min Dual Supply Voltage | 2V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 90 dB |
| Current - Leakage (IS(off)) (Max) | 200pA |
| Channel Capacitance (CS(off), CD(off)) | 4pF 23pF |
| On-state Resistance Match-Nom | 1.3Ohm |
| Switch Time (Ton, Toff) (Max) | 115ns, 45ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 1.3 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 45ns |
| Signal Current-Max | 0.02A |
| Length | 4.9022mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ADG658YRQ-REEL7 Overview
Shipping overseas is convenient with the electronic component packed in 16-SSOP (0.154, 3.90mm Width). To ensure high reliability, a new packaging method Tape & Reel (TR) is used. Multiplexers like this are mounted in the Surface Mount position. Multiplexer and demultiplexer circuits have a number 8:1. Operation at a temperature around -40°C~125°C TA. A total of 16 terminations have been recorded. A high-quality output is provided by the electrical component's 8 channels. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. Electronic part bodies are injected with 16 pins. A 1 circuit is present in this switch device. Search with ADG658 if you are looking for analog multiplexer variants. In this multiplexer, the internal resistance is 75Ohm. The datasheets for the 16 pins explain the functions. Multiplexer or Switches is a typical switch device. Users should never supply a voltage higher than 12V to a switch device. A analog switch ic that has a cost-effective Dual, Single supply type. It is recommended to use 2V as the lowest voltage for the electrical part. For this multiplexer, dual supply voltage is feasible, but it should not exceed 6V. If you are using dual power supplies, you should attach at least 2V. It is integrated with SINGLE-ENDED MULTIPLEXER analog ICs. The electronic component can function from 9V. 210MHz bandwidths enable data to be transferred.
ADG658YRQ-REEL7 Features
8 Channels
Bandwidth: 210MHz
ADG658YRQ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG658YRQ-REEL7 Analog Switches & Multiplexers ICs applications.
- Residential Gateways, Home Gateway/Router
- Industrial
- DVD-R
- Communication systems
- DSUs
- Routers
- Multi-Line E1 Interface Cards
- Video signal routing
- Central office
- Public switching systems
