ADG658YRU

115ns, 45ns 75Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG658 16 Pins 200pA 5V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG658YRU
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 785
Description: 115ns, 45ns 75Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG658 16 Pins 200pA 5V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Contact Plating	Lead, Tin
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tube
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	75Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	10μW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	1
Supply Voltage	5V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG658
Pin Count	16
Operating Supply Voltage	5V
Number of Channels	8
Interface	Parallel
Number of Circuits	1
Max Supply Voltage	12V
Min Supply Voltage	2V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Operating Supply Current	10nA
Nominal Supply Current	1μA
Power Dissipation	10μW
Max Supply Current	1μA
Throw Configuration	DPST
Propagation Delay	115 ns
Turn On Delay Time	370 ns
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	2V~12V ±2V~6V
Bandwidth	210MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	30 ns
Max Dual Supply Voltage	6V
On-State Resistance (Max)	75Ohm
Min Dual Supply Voltage	2V
High Level Output Current	20mA
Dual Supply Voltage	3V
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	90 dB
Current - Leakage (IS(off)) (Max)	200pA
Channel Capacitance (CS(off), CD(off))	4pF 23pF
On-state Resistance Match-Nom	1.3Ohm
Switch Time (Ton, Toff) (Max)	115ns, 45ns
Charge Injection	2pC
Channel-to-Channel Matching (ΔRon)	1.3 Ω
Switching	BREAK-BEFORE-MAKE
Switch-off Time-Max	55ns
Signal Current-Max	0.02A
Height	1.05mm
Length	5mm
Width	4.4mm
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

ADG658YRU Overview

Due to its 16-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. To ensure high reliability, a new packaging method Tube is used. Multiplexers like this are mounted in the Surface Mount position. There is 8:1 ratio between the number of multiplexers and demultiplexers. Operating temperature extended to -40°C~125°C TA. In total, there are 16 terminations. The electronic part provides high-quality output because it has 8 channels. When a voltage supply of 5V is used, the electronic component should be turned on and run. There is an electrical component included in the 16 series. The multiplexer consists of 1 circuits. Search with ADG658 if you are looking for analog multiplexer variants. An switch multiplexer with 75Ohm internal resistance has a value of 75Ohm. Please refer to the datasheets for 16 pins functions. Multiplexer or Switches is a typical switch device. It is generally not recommended to supply a voltage higher than 12V to the switch device in normal circumstances. The lowest voltage fed to the electronic component should be 2V. For this multiplexer to operate, 10nA current would be sufficient. Put voltage above 1μA on the multiplexer to cause damage. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 6V. The voltage should be at least 2V if you are using dual power supplies. A SINGLE-ENDED MULTIPLEXER analog IC is integrated into the board. There is a voltage range of 5V operating voltages for the electrical part. A 8 input needs to be operated. The transfer of data can be performed over 210MHz bandwidths.