ADG658YRUZ

115ns, 45ns 75Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG658 16 Pins 200pA 5V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG658YRUZ
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 947
Description: 115ns, 45ns 75Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG658 16 Pins 200pA 5V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 2 weeks ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	45Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	10μW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG658
Pin Count	16
Operating Supply Voltage	5V
Number of Channels	8
Interface	Parallel
Number of Circuits	1
Max Supply Voltage	12V
Min Supply Voltage	2V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Nominal Supply Current	1μA
Power Dissipation	10μW
Throw Configuration	DPST
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	2V~12V ±2V~6V
Bandwidth	210MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	30 ns
Max Dual Supply Voltage	6V
On-State Resistance (Max)	75Ohm
Min Dual Supply Voltage	2V
High Level Output Current	20mA
Dual Supply Voltage	5V
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	90 dB
Current - Leakage (IS(off)) (Max)	200pA
Channel Capacitance (CS(off), CD(off))	4pF 23pF
On-state Resistance Match-Nom	1.3Ohm
Switch Time (Ton, Toff) (Max)	115ns, 45ns
Charge Injection	2pC
Channel-to-Channel Matching (ΔRon)	1.3 Ω
Switching	BREAK-BEFORE-MAKE
Switch-off Time-Max	55ns
Drain to Source Resistance	45Ohm
Signal Current-Max	0.02A
Height	1.05mm
Length	5mm
Width	4.4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG658YRUZ Overview

The electrical component comes in 16-TSSOP (0.173, 4.40mm Width) packaging, which makes it convenient to ship overseas. A high level of reliability can be achieved through the use of an advanced packaging method Tube. A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 8:1. Operational temperature extended around -40°C~125°C TA. Total terminations are 16. As a result of its 8 channels, this electronic component provides high-quality output. It is safe to turn on and run the electronic component with a 5V voltage supply. The electrical component body receives 16 pins. 1 circuits are used in this analogue multiplexer. Use ADG658 to search for variants of the digital switches. In this multiplexer, the internal resistance is 45Ohm. You can find the functions of the 16 pins in the datasheets. This switch device is a typical Multiplexer or Switches. A voltage higher than 12V should not normally be supplied to the switches. 2V should be the lowest voltage fed to the electronic component. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 6V. If you are using dual power supplies, you should attach at least 2V. Integrated with an analog IC SINGLE-ENDED MULTIPLEXER. This electrical part is compatible with 5V operating voltages. Among the inputs that can be operated are the 8 inputs. The data can be transferred over a wide range of bandwidths, called 210MHz bandwidths. Resistivity from Drain to Source is 45Ohm for this electronic part.