ADG659YCPZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-VQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 75Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 10μW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADG659 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Channels | 4 |
| Interface | Parallel |
| Number of Circuits | 2 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 10nA |
| Power Dissipation | 10μW |
| Logic Function | Multiplexer |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 2V~12V ±2V~6V |
| Supply Type | Dual, Single |
| Bandwidth | 400MHz |
| Supply Current-Max (Isup) | 0.001mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 30 ns |
| Max Dual Supply Voltage | 6V |
| On-State Resistance (Max) | 75Ohm |
| Min Dual Supply Voltage | 2V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 90 dB |
| Current - Leakage (IS(off)) (Max) | 200pA |
| Channel Capacitance (CS(off), CD(off)) | 4pF 12pF |
| On-state Resistance Match-Nom | 1.3Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 115ns, 45ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 1.3 Ω |
| Crosstalk | -90dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 55ns |
| Height Seated (Max) | 1mm |
| Length | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG659YCPZ-REEL7 Overview
Due to its 16-VQFN Exposed Pad, CSP packaging, the electronic part is convenient for international shipping. High reliability is achieved by using advanced packaging method Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have a ratio of 4:1. Operational temperature extended around -40°C~85°C TA. Total terminations are 16. High-quality output is provided by the electronic component's 4 channels. A 5V voltage supply should turn on and run the electronic component. A key feature of the 16 series is the inclusion of this electronic part as part of its design. Circuits based on SP4T switching are used to construct these analog switch ics. Circuits number 2 make up this analogue multiplexer. Try searching with ADG659 to find analog multiplexer variants. The internal resistance of this digital multiplexer is 75Ohm. Please refer to the datasheets for 16 pins functions. normally, users should not supply switches with voltages higher than 12V. An effective Dual, Single supply digital multiplexer. The lowest voltage the electronic part should receive is 2V. The switch device would be able to operate with 10nA current. For this multiplexer, dual supply voltage is feasible, but it should not exceed 6V. If you are using dual power supplies, you should attach at least 2V. This electrical part is compatible with 5V operating voltages. Operating 8 inputs is required. 400MHz bandwidths enable data to be transferred.
ADG659YCPZ-REEL7 Features
4 Channels
Switch Circuit: SP4T
10nA Supply Current
Bandwidth: 400MHz
ADG659YCPZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG659YCPZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Automotive applications
- Public switching systems
- Multi-Line E1 Interface Cards
- Audio and video signal routing
- Modems
- Multiplexers
- Communication systems
- Industrial
- Private Branch Exchange (PBX)
- E1 Multiplexer
