Parameters |
Mounting Type |
Surface Mount |
Package / Case |
16-SSOP (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tube |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
75Ohm |
Terminal Finish |
Tin/Lead (Sn85Pb15) |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
10μW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.635mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADG659 |
Pin Count |
16 |
Operating Supply Voltage |
5V |
Number of Channels |
4 |
Number of Circuits |
2 |
Max Supply Voltage |
12V |
Min Supply Voltage |
2V |
Analog IC - Other Type |
DIFFERENTIAL MULTIPLEXER |
Power Dissipation |
10μW |
Throw Configuration |
4PST |
Voltage - Supply, Single/Dual (±) |
2V~12V ±2V~6V |
Bandwidth |
400MHz |
Supply Current-Max (Isup) |
0.001mA |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Turn-Off Delay Time |
30 ns |
Max Dual Supply Voltage |
6V |
On-State Resistance (Max) |
75Ohm |
Min Dual Supply Voltage |
2V |
Multiplexer/Demultiplexer Circuit |
4:1 |
Off-state Isolation-Nom |
90 dB |
Current - Leakage (IS(off)) (Max) |
200pA |
Channel Capacitance (CS(off), CD(off)) |
4pF 12pF |
On-state Resistance Match-Nom |
1.3Ohm |
Switch Circuit |
SP4T |
Switch Time (Ton, Toff) (Max) |
115ns, 45ns |
Charge Injection |
2pC |
Channel-to-Channel Matching (ΔRon) |
1.3 Ω |
Crosstalk |
-90dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-off Time-Max |
55ns |
Radiation Hardening |
No |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
ADG659YRQ Overview
The electronic component is convenient to ship overseas because it is packed in a 16-SSOP (0.154, 3.90mm Width). High reliability is provided by advanced packaging method Tube. In Surface Mount, this analog switch is mounted. 4:1 is the ratio of multiplexer to demultiplexer circuits. An extended operating temperature of -40°C~125°C TA degrees Celsius. In total, there have been 16 terminations. As a result of its 4 channels, this electronic component provides high-quality output. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. This electrical component is included in the 16 series of products. Multiplexers built on a SP4T switching circuit are built. There are 2 circuits in this switch device. ADG659 can be used to search for analog multiplexer variants. This digital multiplexer has 75Ohm internal resistance. To find out what the 16 pins do, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. Multiplexers should not be powered above 12V in normal situations. A low voltage of 2V should be applied to the electronic component. Despite this switch's dual supply capability, its voltage should not exceed 6V. When using dual power supplies, you should attach at least 2V. It is integrated with DIFFERENTIAL MULTIPLEXER analog ICs. There is a voltage range of 5V operating voltages for the electrical part. 400MHz bandwidths enable data to be transferred.
ADG659YRQ Features
4 Channels
Switch Circuit: SP4T
Bandwidth: 400MHz
ADG659YRQ Applications
There are a lot of Analog Devices Inc. ADG659YRQ Analog Switches & Multiplexers ICs applications.
- Medical systems
- Video signal routing
- Avionics test equipment
- Industrial and process control systems
- Power routing
- Data Acquisition Systems
- ATM
- Fiber to the Home
- Audio signal routing
- Sample hold systems