Parameters |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e0 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
75Ohm |
Terminal Finish |
Tin/Lead (Sn85Pb15) |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADG659 |
Pin Count |
16 |
Power Supplies |
3/5/+-5V |
Number of Channels |
4 |
Number of Circuits |
2 |
Max Supply Voltage |
12V |
Min Supply Voltage |
2V |
Analog IC - Other Type |
DIFFERENTIAL MULTIPLEXER |
Throw Configuration |
4PST |
Voltage - Supply, Single/Dual (±) |
2V~12V ±2V~6V |
Supply Current-Max (Isup) |
0.001mA |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Max Dual Supply Voltage |
6V |
-3db Bandwidth |
400MHz |
On-State Resistance (Max) |
75Ohm |
Min Dual Supply Voltage |
2V |
Multiplexer/Demultiplexer Circuit |
4:1 |
Off-state Isolation-Nom |
90 dB |
Current - Leakage (IS(off)) (Max) |
200pA |
Channel Capacitance (CS(off), CD(off)) |
4pF 12pF |
On-state Resistance Match-Nom |
1.3Ohm |
Switch Circuit |
SP4T |
Switch Time (Ton, Toff) (Max) |
115ns, 45ns |
Charge Injection |
2pC |
Channel-to-Channel Matching (ΔRon) |
1.3 Ω |
Crosstalk |
-90dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-off Time-Max |
55ns |
Length |
5mm |
Radiation Hardening |
No |
RoHS Status |
Non-RoHS Compliant |
ADG659YRU-REEL7 Overview
The electronic component is convenient to ship overseas because it is packed in a 16-TSSOP (0.173, 4.40mm Width). This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have a number of circuits 4:1. The operating temperature is extended to around -40°C~125°C TA. Totally, there are 16 terminations. A electrical component with 4 channels is capable of high-quality output. Powered by a 5V voltage supply, the electrical part should be switched on and run. An electrical component of this type can be found in the 16 series. These analog multiplexers are built based on SP4T switching circuits. There are 2 circuits in this multiplexer. Using the ADG659 search parameter, you can discover variants of the switch. Analog switches have 75Ohm internal resistance. The functions of 16 pins can be found in the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. A voltage higher than 12V should not normally be supplied to the switches. A low voltage of 2V should be applied to the electronic component. If put voltage greater than 6V on the multiplexer, damage may be caused to the device. If you are using a dual power supply, you should attach at least 2V. Integrated with an analog IC DIFFERENTIAL MULTIPLEXER.
ADG659YRU-REEL7 Features
4 Channels
Switch Circuit: SP4T
-3db Bandwidth: 400MHz
ADG659YRU-REEL7 Applications
There are a lot of Analog Devices Inc. ADG659YRU-REEL7 Analog Switches & Multiplexers ICs applications.
- Industrial control systems
- Multiplexers
- CSU
- Switching Systems
- Routers
- ISDN NT1/TA
- Access Concentrators
- Industrial
- Wireless Local Loop
- Precision test equipment