Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 2 weeks ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
75Ohm |
Max Power Dissipation |
10μW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADG659 |
Pin Count |
16 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
5V |
Number of Channels |
4 |
Interface |
Parallel |
Number of Circuits |
2 |
Max Supply Voltage |
12V |
Min Supply Voltage |
2V |
Operating Supply Current |
10nA |
Power Dissipation |
10μW |
Throw Configuration |
4PST |
Logic Function |
Multiplexer |
Number of Inputs |
8 |
Voltage - Supply, Single/Dual (±) |
2V~12V ±2V~6V |
Supply Type |
Dual, Single |
Bandwidth |
400MHz |
Supply Current-Max (Isup) |
0.001mA |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Turn-Off Delay Time |
30 ns |
Max Dual Supply Voltage |
6V |
On-State Resistance (Max) |
75Ohm |
Min Dual Supply Voltage |
2V |
High Level Output Current |
20mA |
Multiplexer/Demultiplexer Circuit |
4:1 |
Off-state Isolation-Nom |
90 dB |
Current - Leakage (IS(off)) (Max) |
200pA |
Channel Capacitance (CS(off), CD(off)) |
4pF 12pF |
On-state Resistance Match-Nom |
1.3Ohm |
Switch Circuit |
SP4T |
Switch Time (Ton, Toff) (Max) |
115ns, 45ns |
Charge Injection |
2pC |
Channel-to-Channel Matching (ΔRon) |
1.3 Ω |
Crosstalk |
-90dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-off Time-Max |
55ns |
Length |
5mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADG659YRUZ-REEL7 Overview
The electrical component comes in 16-TSSOP (0.173, 4.40mm Width) packaging, which makes it convenient to ship overseas. High reliability is ensured by the advanced packaging method Tape & Reel (TR). This analog switch is mounted in Surface Mount. There is 4:1 ratio between the number of multiplexers and demultiplexers. Temperatures around -40°C~125°C TA are extended for operation. There are 16 terminations totally. High-quality output is provided by the electronic component's 4 channels. When the electronic component is given a voltage of 5V, it should be turned on and run. An electrical component like this is included in the 16 series. Circuits based on SP4T switching are used to construct these analog switch ics. There are 2 circuits in this switch device. Try searching with ADG659 to find analog multiplexer variants. Internally, this switch multiplexer has a resistance of 75Ohm. The datasheets for the 16 pins explain the functions. It is generally not recommended to supply a voltage higher than 12V to the switch device in normal circumstances. A analog switch ic that has a cost-effective Dual, Single supply type. It is recommended to use 2V as the lowest voltage for the electrical part. For this multiplexer to operate, 10nA current would be sufficient. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 6V. For dual power supplies, a voltage of at least 2V should be attached. Operating voltages range from 5V. The electrical component supports 8 inputs. This switch operates within the bandwidth of 400MHz.
ADG659YRUZ-REEL7 Features
4 Channels
Switch Circuit: SP4T
10nA Supply Current
Bandwidth: 400MHz
ADG659YRUZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG659YRUZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Fiber to the Home
- Cable PC
- Low-Voltage
- Wireless Local Loop
- PDAs
- Cellular phones
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Fault Tolerant Systems
- Communication systems
- Power routing