ADG701BRM
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-G8 |
| Operating Temperature (Max) | 85°C |
| Operating Temperature (Min) | -40°C |
| Supply Voltage-Max (Vsup) | 5.5V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 1.8V |
| Number of Channels | 1 |
| Analog IC - Other Type | SPST |
| On-State Resistance (Max) | 5Ohm |
| Off-state Isolation-Nom | 55 dB |
| Switch-on Time-Max | 20ns |
| Switch-off Time-Max | 13ns |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | Non-RoHS Compliant |
ADG701BRM Overview
Due to its 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) packaging, the electronic part is convenient for international shipping. In order to provide high reliability, an advanced packaging method Tube is used. A switch device like this is mounted in Surface Mount. Totally, there are 8 terminations. A 1 channel electronic part produces high-quality output. When the electronic component is given a voltage of 3V, it should be turned on and run. An injection of 8 pins is performed into the body of the electrical component. It is integrated with a SPST analog IC. Analog switch ics need a voltage of 1.8V to be powered. In temperatures above 85°C, this multiplexer may malfunction. The operating environment should be set to over -40°C.
ADG701BRM Features
1 Channels
ADG701BRM Applications
There are a lot of Rochester Electronics, LLC ADG701BRM Analog Switches & Multiplexers ICs applications.
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- E1 Multiplexer
- Central office
- Industrial control systems
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Routers
- Frame Relay Equipment
- PBX interfaces
- Battery-powered systems
- Modems
