ADG701LBRJ-500RL7
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Supplier Device Package | SOT-23-5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 3Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 5μW |
| Base Part Number | ADG701 |
| Number of Outputs | 1 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Power Dissipation | 5μW |
| Max Supply Current | 1μA |
| Turn On Delay Time | 12 ns |
| Number of Inputs | 1 |
| Turn-Off Delay Time | 8 ns |
| -3db Bandwidth | 200MHz |
| On-State Resistance (Max) | 3Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 17pF 17pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 18ns, 12ns |
| Charge Injection | 5pC |
| Voltage - Supply, Single (V+) | 1.8V~5V |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ADG701LBRJ-500RL7 Overview
The electronic part can be shipped overseas conveniently because it is packaged in SC-74A, SOT-753. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Operating temperature around -40°C~85°C TA extended. By its 1 channels, the electronic component provides high-quality output. The analog switch ics are built using SPST - NO switching circuits. There are 1 circuits in this multiplexer. Try searching for ADG701 variants of the analog switch ic. This digital multiplexer has 3Ohm internal resistance. Datasheets for functions of 5 pins are available. Users should never supply a voltage higher than 5.5V to a switch device. A low voltage of 1.8V should be applied to the electronic component. A voltage of 1.8V~5V is required for this switch device, which drains from a single voltage source. A voltage higher than 1μA may cause damage to the switch multiplexer. Among the inputs that can be operated are the 1 inputs. It is not recommended to operate the switches in an environment with a temperature higher than 85°C. The analog switch ics has 1 outputs. Suppliers are offering a SOT-23-5 package.
ADG701LBRJ-500RL7 Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 200MHz
ADG701LBRJ-500RL7 Applications
There are a lot of Analog Devices Inc. ADG701LBRJ-500RL7 Analog Switches & Multiplexers ICs applications.
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Video switching
- RGB switches
- High reliability control systems
- Cable Modem
- Microwave transmission systems
- ISDN NT1/TA
- SONET
- Communications systems
- Residential Gateways, Home Gateway/Router
