Parameters |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
5 |
ECCN Code |
EAR99 |
Resistance |
3Ohm |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
5μW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3V |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
ADG701 |
Output |
SEPARATE OUTPUT |
Pin Count |
5 |
Qualification Status |
Not Qualified |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1.8V |
Test Frequency |
1MHz |
Operating Supply Current |
1nA |
Power Dissipation |
5μW |
Max Supply Current |
1μA |
Throw Configuration |
SPST |
Turn On Delay Time |
12 ns |
Number of Inputs |
1 |
Supply Type |
Single |
Bandwidth |
200MHz |
Turn-Off Delay Time |
8 ns |
On-State Resistance (Max) |
3Ohm |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
55 dB |
Current - Leakage (IS(off)) (Max) |
250pA |
Channel Capacitance (CS(off), CD(off)) |
17pF 17pF |
On-state Resistance Match-Nom |
1.5Ohm |
Switch Circuit |
SPST - NO |
Switch Time (Ton, Toff) (Max) |
12ns, 8ns (Typ) |
Charge Injection |
5pC |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
20ns |
Voltage - Supply, Single (V+) |
1.8V~5V |
Normal Position |
NC |
Length |
2.9mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 weeks ago) |
Mounting Type |
Surface Mount |
Package / Case |
SC-74A, SOT-753 |
Surface Mount |
YES |
Number of Pins |
5 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
ADG701LBRJZ-500RL7 Overview
Shipping overseas is convenient due to the electrical component's packing in SC-74A, SOT-753. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. In Surface Mount, this analog switch is mounted. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. The total number of terminations is 5. By its 1 channels, the electronic component provides high-quality output. In the case of a voltage supply of 3V volts, the electrical part can be powered up and run. A total of 5 pins are injected into the electrical part body. SPST - NO switching circuits are used in these analog switch ics. Try searching for the analog switch ic with ADG701 if you are looking for variants. As far as internal resistance is concerned, it has 3Ohm. Please refer to the datasheets for 5 pins functions. The analogue multiplexer in this example is a typical Multiplexer or Switches. Users should never supply a voltage higher than 5.5V to a switch device. Analogue multiplexer with a Single supply type that is cost-effective. The lowest voltage fed to the electronic component should be 1.8V. This digital switch can be operated with a current of 1nA. Analogue multiplexers require a 1.8V~5V voltage to drain from a single voltage supply. A voltage higher than 1μA may cause damage to the switch multiplexer. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. There are 1 inputs to be operated. This switch operates within the bandwidth of 200MHz.
ADG701LBRJZ-500RL7 Features
1 Channels
Switch Circuit: SPST - NO
1nA Supply Current
Bandwidth: 200MHz
ADG701LBRJZ-500RL7 Applications
There are a lot of Analog Devices Inc. ADG701LBRJZ-500RL7 Analog Switches & Multiplexers ICs applications.
- Audio and video switching
- Audio/video switches
- Modems
- DSUs
- Transmit
- Industrial
- Cable PC
- Medical Instrumentation
- Access Concentrators
- T1/E1 Terminals