ADG702BRMZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 3Ohm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 5μW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG702 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Polarity | Non-Inverting |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Interface | Parallel |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Operating Supply Current | 1nA |
| Power Dissipation | 5μW |
| Max Supply Current | 1μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 12 ns |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Turn-Off Delay Time | 8 ns |
| On-State Resistance (Max) | 3Ohm |
| High Level Output Current | 30mA |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 55 dB |
| Current - Leakage (IS(off)) (Max) | 10pA Typ |
| Channel Capacitance (CS(off), CD(off)) | 17pF 17pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 12ns, 8ns (Typ) |
| Charge Injection | 5pC |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 20ns |
| Voltage - Supply, Single (V+) | 1.8V~5V |
| Normal Position | NO |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG702BRMZ-REEL7 Overview
The electronic part can be shipped overseas conveniently because it is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). High reliability is ensured by the advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. Extended operating temperature around -40°C~85°C TA. There are 8 terminations totally. This electronic part offers high-quality output due to its 1 channels. It is safe to turn on and run the electronic component with a 3V voltage supply. An electrical component of this type can be found in the 8 series. Multiplexers built on a SPST - NC switching circuit are built. Using the ADG702 search parameter, you can discover variants of the switch. This digital multiplexer has 3Ohm internal resistance. The datasheets for the 8 pins explain the functions. There is Multiplexer or Switches analog multiplexer like this in the world. Users should never supply a voltage higher than 5.5V to a switch device. An effective Single supply digital multiplexer. The lowest voltage the electronic part should receive is 1.8V. This multiplexer would work with 1nA current. Analogue multiplexers require a 1.8V~5V voltage to drain from a single voltage supply. When the digital multiplexer is charged above 1μA, damage can occur. In 200MHz-bandwidths, data can be transferred.
ADG702BRMZ-REEL7 Features
1 Channels
Switch Circuit: SPST - NC
1nA Supply Current
Bandwidth: 200MHz
ADG702BRMZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG702BRMZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Communication systems
- MP3 players
- Battery Powered Instruments
- SDH
- Relay replacements
- Public switching systems
- RGB switches
- Cable PC
- Microprocessor controlled systems
- T1/E1 Terminals
