ADG702LBRJ-REEL7
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 3Ohm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 5μW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG702 |
| Pin Count | 5 |
| Qualification Status | Not Qualified |
| Polarity | Non-Inverting |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 0V |
| Operating Supply Current | 1nA |
| Power Dissipation | 5μW |
| Max Supply Current | 1pA |
| Throw Configuration | SPST |
| Turn On Delay Time | 12 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 8 ns |
| -3db Bandwidth | 200MHz |
| On-State Resistance (Max) | 3Ohm |
| High Level Output Current | 30mA |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 55 dB |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 17pF 17pF |
| On-state Resistance Match-Nom | 1.5Ohm |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 12ns, 8ns (Typ) |
| Charge Injection | 5pC |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 20ns |
| Voltage - Supply, Single (V+) | 1.8V~5V |
| Normal Position | NO |
| Length | 2.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ADG702LBRJ-REEL7 Overview
Shipping overseas is convenient with the electronic component packed in SC-74A, SOT-753. High reliability is provided by advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a number of circuits 1:1. Operational temperature extended around -40°C~85°C TA. Totally, there are 5 terminations. A 1 channel electronic part produces high-quality output. With a 3V voltage supply, the electrical component should be turned on and run. This electrical component is included in the 5 series of products. Multiplexers built on a SPST - NC switching circuit are built. There are 1 circuits in this switch device. Using the ADG702 search parameter, you can discover variants of the switch. An switch multiplexer with 3Ohm internal resistance has a value of 3Ohm. To find out what the functions of 5 pins are, please refer to their datasheets. Multiplexer or Switches is a typical switch device. Users should never supply a voltage higher than 5.5V to a switch device. Analogue multiplexer with a Single supply type that is cost-effective. There should be 0V voltage fed to the electrical part below 0V. In order to operate this switch device, it would need a current of 1nA. An analogue multiplexer drains from a single voltage supply at 1.8V~5V. If you put voltage higher than 1pA on the digital multiplexer, damage may occur.
ADG702LBRJ-REEL7 Features
1 Channels
Switch Circuit: SPST - NC
1nA Supply Current
-3db Bandwidth: 200MHz
ADG702LBRJ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG702LBRJ-REEL7 Analog Switches & Multiplexers ICs applications.
- DSLAMs
- Cable PC
- Mechanical reed relay replacement
- Battery Powered Systems
- Communication systems
- New designs requiring multiplexer functions
- Optical Applications
- T1/E1 Terminals
- Communications systems
- High reliability control systems
