Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 1 week ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
SOT-23-6 |
Surface Mount |
YES |
Number of Pins |
6 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
ECCN Code |
EAR99 |
Resistance |
3Ohm |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
5μW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3V |
Terminal Pitch |
0.95mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
ADG702 |
Pin Count |
6 |
Polarity |
Non-Inverting |
Power Supplies |
3/5V |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1.8V |
Test Frequency |
1MHz |
Power Dissipation |
5μW |
Max Supply Current |
1pA |
Throw Configuration |
SPST |
Turn On Delay Time |
12 ns |
Bandwidth |
200MHz |
Turn-Off Delay Time |
8 ns |
On-State Resistance (Max) |
3Ohm |
High Level Output Current |
30mA |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
55 dB |
Current - Leakage (IS(off)) (Max) |
250pA |
Channel Capacitance (CS(off), CD(off)) |
17pF 17pF |
On-state Resistance Match-Nom |
1.5Ohm |
Switch Circuit |
SPST - NC |
Switch Time (Ton, Toff) (Max) |
12ns, 8ns (Typ) |
Charge Injection |
5pC |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
20ns |
Voltage - Supply, Single (V+) |
1.8V~5V |
Normal Position |
NO |
Length |
2.9mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADG702LBRTZ-REEL7 Overview
Due to its SOT-23-6 packaging, the electronic part is convenient for international shipping. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). In Surface Mount, you'll find this switch device. 1:1 is the number of circuits in the multiplexer and demultiplexer. The operating temperature is extended to around -40°C~85°C TA. There are 6 terminations totally. The electronic part delivers high-quality output through its 1 channels. If the voltage supply is 3V volts, the electrical component should be turned on and run. This electronic part can be found in the 6 series. On the other hand, analog switches can be constructed using SPST - NC switching circuits. Use ADG702 to search for variants of the digital switches. Internally, this switch multiplexer has a resistance of 3Ohm. To find out what the 6 pins do, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. Users shouldn't supply more than 5.5V voltage to the switch device. In order for the electronic part to function properly, the lowest voltage should be 1.8V. Draining from a single voltage supply, this analog switch requires a voltage of 1.8V~5V. Put voltage above 1pA on the multiplexer to cause damage. The transfer of data can be performed over 200MHz bandwidths.
ADG702LBRTZ-REEL7 Features
1 Channels
Switch Circuit: SPST - NC
Bandwidth: 200MHz
ADG702LBRTZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG702LBRTZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Communication systems
- Video switching
- MP3 players
- High reliability control systems
- Microprocessor Controlled Analog Systems
- Avionics and Military Systems
- Remote wireless modules
- Battery Powered Instruments
- Avionics test equipment