ADG706BRU

32ns, 16ns (Typ) 4.5Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG706 28 Pins 100pA 2.5V 28-TSSOP (0.173, 4.40mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG706BRU
Package: 28-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 663
Description: 32ns, 16ns (Typ) 4.5Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG706 28 Pins 100pA 2.5V 28-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Mounting Type	Surface Mount
Package / Case	28-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	28
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	28
ECCN Code	EAR99
Resistance	4.5Ohm
Additional Feature	CAN ALSO OPERATE WITH SINGLE 3V OR SINGLE 5V SUPPLIES
Subcategory	Multiplexer or Switches
Max Power Dissipation	5μW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	235
Number of Functions	1
Supply Voltage	2.5V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	20
Base Part Number	ADG706
Pin Count	28
Operating Supply Voltage	5V
Power Supplies	3/5/+-3V
Number of Channels	16
Interface	Parallel
Number of Circuits	1
Max Supply Voltage	5.5V
Min Supply Voltage	1.8V
Analog IC - Other Type	SPST
Operating Supply Current	1nA
Nominal Supply Current	1μA
Power Dissipation	5μW
Max Supply Current	1μA
Propagation Delay	40 ns
Turn On Delay Time	40 ns
Number of Inputs	16
Voltage - Supply, Single/Dual (±)	1.8V~5.5V ±2.5V
Bandwidth	25MHz
Neg Supply Voltage-Nom (Vsup)	-2.5V
Turn-Off Delay Time	10 ns
On-State Resistance (Max)	4.5Ohm
High Level Output Current	30mA
Dual Supply Voltage	2.5V
Multiplexer/Demultiplexer Circuit	16:1
Off-state Isolation-Nom	80 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	13pF 180pF
On-state Resistance Match-Nom	0.3Ohm
Switch Time (Ton, Toff) (Max)	32ns, 16ns (Typ)
Charge Injection	8pC
Crosstalk	-80dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	50ns
Switch-off Time-Max	26ns
Signal Current-Max	0.03A
Height	1.05mm
Length	9.7mm
Width	4.4mm
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

ADG706BRU Overview

The electronic component is convenient to ship overseas because it is packed in a 28-TSSOP (0.173, 4.40mm Width). The advanced packaging method Tube provides high reliability. In Surface Mount, you'll find this switch device. 16:1 is the ratio of multiplexer to demultiplexer circuits. Around -40°C~85°C TA is the extended operating temperature. In total, 28 terminations have occurred. The electronic part provides high-quality output because it has 16 channels. Turning on and running the electrical part should be easy with a 2.5V voltage supply. The electronic part body is injected with 28 pins. This multiplexer is composed of 1 circuits. Look for analog switch ic variants by searching with ADG706. As far as internal resistance is concerned, it has 4.5Ohm. For details about the functions of 28 pins, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. Users shouldn't supply more than 5.5V voltage to the switch device. It is recommended that the electrical component receives a voltage of 1.8V. This multiplexer would work with 1nA current. If you put voltage higher than 1μA on the digital multiplexer, damage may occur. With a SPST analog IC integrated into the board. A voltage of 5V can be used to operate the electronic component. Operating 16 inputs is required. 25MHz-bandwidths can be used to transfer data between multiplexers. Check out the electrical component's additional features, such as the following: CAN ALSO OPERATE WITH SINGLE 3V OR SINGLE 5V SUPPLIES.