ADG706BRU-REEL7
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 28-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 4.5Ohm |
| Additional Feature | CAN ALSO OPERATE WITH SINGLE 3V OR SINGLE 5V SUPPLIES |
| Max Power Dissipation | 5μW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG706 |
| Pin Count | 28 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 3/5/+-3V |
| Number of Channels | 16 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Analog IC - Other Type | SPST |
| Operating Supply Current | 1nA |
| Power Dissipation | 5μW |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±2.5V |
| Supply Type | Dual, Single |
| Bandwidth | 25MHz |
| Neg Supply Voltage-Nom (Vsup) | -2.5V |
| Turn-Off Delay Time | 10 ns |
| On-State Resistance (Max) | 4.5Ohm |
| Dual Supply Voltage | 2.5V |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 80 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 13pF 180pF |
| On-state Resistance Match-Nom | 0.3Ohm |
| Switch Time (Ton, Toff) (Max) | 32ns, 16ns (Typ) |
| Charge Injection | 8pC |
| Crosstalk | -80dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 50ns |
| Switch-off Time-Max | 26ns |
| Signal Current-Max | 0.03A |
| Length | 9.7mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ADG706BRU-REEL7 Overview
Due to its 28-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). This analog switch is mounted in Surface Mount. Multiplexer and demultiplexer circuits have a number 16:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. Total terminations are 28. As a result of its 16 channels, this electronic component provides high-quality output. A 2.5V voltage supply should turn on and run the electronic component. Electronic part bodies are injected with 28 pins. Circuits number 1 make up this analogue multiplexer. Using the ADG706 search parameter, you can discover variants of the switch. This digital multiplexer has 4.5Ohm internal resistance. To find out what the 28 pins do, please refer to the datasheets. Multiplexers should not be powered above 5.5V in normal situations. Analog switch ics with Dual, Single supply type are cost-effective. It is recommended to use 1.8V as the lowest voltage for the electrical part. This multiplexer would work with 1nA current. Integrated with an analog IC SPST. The electronic component can function from 5V. There are 25MHz bandwidths for data transfer. Check out the electrical component's additional features, such as the following: CAN ALSO OPERATE WITH SINGLE 3V OR SINGLE 5V SUPPLIES.
ADG706BRU-REEL7 Features
16 Channels
1nA Supply Current
Bandwidth: 25MHz
Additional Features: CAN ALSO OPERATE WITH SINGLE 3V OR SINGLE 5V SUPPLIES
ADG706BRU-REEL7 Applications
There are a lot of Analog Devices Inc. ADG706BRU-REEL7 Analog Switches & Multiplexers ICs applications.
- Multi-Line E1 Interface Cards
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- High-Voltage
- Digital access cross connects
- Sample-and-hold systems
- Multiplexers
- Optical Applications
- Cellular phones
- DSLAMs
- HDTV
