ADG706BRUZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 28-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 4.5Ohm |
| Additional Feature | CAN ALSO OPERATE WITH SINGLE 3V OR SINGLE 5V SUPPLIES |
| Max Power Dissipation | 5μW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG706 |
| Pin Count | 28 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Channels | 16 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Analog IC - Other Type | SPST |
| Operating Supply Current | 1nA |
| Power Dissipation | 5μW |
| Turn On Delay Time | 50 ns |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±2.5V |
| Supply Type | Dual, Single |
| Bandwidth | 25MHz |
| Neg Supply Voltage-Nom (Vsup) | -2.5V |
| Turn-Off Delay Time | 14 ns |
| On-State Resistance (Max) | 4.5Ohm |
| High Level Output Current | 30mA |
| Dual Supply Voltage | 2.5V |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 80 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 13pF 180pF |
| On-state Resistance Match-Nom | 0.3Ohm |
| Switch Time (Ton, Toff) (Max) | 32ns, 16ns (Typ) |
| Charge Injection | 8pC |
| Crosstalk | -80dB @ 1MHz |
| Switch-off Time-Max | 26ns |
| Height | 1.1mm |
| Length | 9.8mm |
| Width | 4.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG706BRUZ-REEL7 Overview
The electronic part can be shipped overseas conveniently because it is packaged in 28-TSSOP (0.173, 4.40mm Width). High reliability is provided by advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. In the multiplexer and demultiplexer, 16:1 represents the number of circuits. Operational temperature extended around -40°C~85°C TA. There are 28 terminations totally. A electrical component with 16 channels is capable of high-quality output. Turning on and running the electrical part should be easy with a 2.5V voltage supply. An injection of 28 pins is performed into the body of the electrical component. There are 1 circuits in this multiplexer. Search with ADG706 if you are looking for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 4.5Ohm. To find out what the 28 pins do, please refer to the datasheets. A voltage higher than 5.5V should not normally be supplied to the switches. The digital multiplexer has a low cost Dual, Single supply. The lowest voltage fed to the electronic component should be 1.8V. It would be sufficient to run this analogue multiplexer with 1nA current. Integrated with an analog IC SPST. 5V operating voltages can be used with this electrical part. It is possible to transfer data over a 25MHz-bandwidth. This electronic part has additional features, such as: CAN ALSO OPERATE WITH SINGLE 3V OR SINGLE 5V SUPPLIES.
ADG706BRUZ-REEL7 Features
16 Channels
1nA Supply Current
Bandwidth: 25MHz
Additional Features: CAN ALSO OPERATE WITH SINGLE 3V OR SINGLE 5V SUPPLIES
ADG706BRUZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG706BRUZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Relay replacements
- Relay Replacement
- High speed data transmission line cards
- Sample hold systems
- Imaging
- PBXs
- ATM
- Fiber to the Home
- Access Concentrators
- PBX interfaces
