ADG707BRU-REEL
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 28-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 4.5Ohm |
| Additional Feature | CAN ALSO OPERATE WITH SINGLE 3V OR SINGLE 5V SUPPLIES |
| Max Power Dissipation | 5μW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG707 |
| Pin Count | 28 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 3/5/+-3V |
| Number of Channels | 8 |
| Interface | Parallel |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Operating Supply Current | 1nA |
| Power Dissipation | 5μW |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±2.5V |
| Supply Type | Dual, Single |
| Bandwidth | 36MHz |
| Supply Current-Max (Isup) | 0.001mA |
| Neg Supply Voltage-Nom (Vsup) | -2.5V |
| Turn-Off Delay Time | 10 ns |
| On-State Resistance (Max) | 4.5Ohm |
| High Level Output Current | 30mA |
| Dual Supply Voltage | 2.5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 80 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 13pF 90pF |
| On-state Resistance Match-Nom | 0.3Ohm |
| Switch Time (Ton, Toff) (Max) | 32ns, 16ns (Typ) |
| Charge Injection | 8pC |
| Crosstalk | -80dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 50ns |
| Signal Current-Max | 0.03A |
| Height Seated (Max) | 1.1mm |
| Length | 9.7mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ADG707BRU-REEL Overview
Packed in 28-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. High reliability is achieved by using advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a ratio of 8:1. Increasing operating temperature to around -40°C~85°C TA. The total number of terminations is 28. By its 8 channels, the electronic component provides high-quality output. Powered by a 2.5V voltage supply, the electrical part should be switched on and run. This electronic part can be found in the 28 series. There are 2 circuits in this switch device. Try searching with ADG707 if you're looking for variants. There is 4.5Ohm internal resistance in this digital multiplexer. To find out what the 28 pins do, please refer to the datasheets. normally, users should not supply switches with voltages higher than 5.5V. Digital switch that provides Dual, Single power at a cost-effective price. 1.8V is the lowest voltage that should be fed to the electronic electronic part. An operating current of 1nA would be sufficient for this switch device. This electrical part is compatible with 5V operating voltages. 36MHz-bandwidths can be used to transfer data between multiplexers. Don't forget the additional features of this electronic part, such as: CAN ALSO OPERATE WITH SINGLE 3V OR SINGLE 5V SUPPLIES.
ADG707BRU-REEL Features
8 Channels
1nA Supply Current
Bandwidth: 36MHz
Additional Features: CAN ALSO OPERATE WITH SINGLE 3V OR SINGLE 5V SUPPLIES
ADG707BRU-REEL Applications
There are a lot of Analog Devices Inc. ADG707BRU-REEL Analog Switches & Multiplexers ICs applications.
- Data switching
- Communication systems
- Cell phones
- Audio and video signal routing
- Industrial
- Multi-Line E1 Interface Cards
- USB 1.1 signal switching circuits
- High-Voltage
- SONET
- ATM
