ADG707BRU-REEL7
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 28-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 4.5Ohm |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | CAN ALSO OPERATE WITH SINGLE 3V OR SINGLE 5V SUPPLIES |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG707 |
| Pin Count | 28 |
| Qualification Status | Not Qualified |
| Power Supplies | 3/5/+-3V |
| Number of Channels | 8 |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Number of Inputs | 16 |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±2.5V |
| Supply Current-Max (Isup) | 0.001mA |
| Neg Supply Voltage-Nom (Vsup) | -2.5V |
| -3db Bandwidth | 36MHz |
| On-State Resistance (Max) | 4.5Ohm |
| Dual Supply Voltage | 2.5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 80 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 13pF 90pF |
| On-state Resistance Match-Nom | 0.3Ohm |
| Switch Time (Ton, Toff) (Max) | 32ns, 16ns (Typ) |
| Charge Injection | 8pC |
| Crosstalk | -80dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 50ns |
| Signal Current-Max | 0.03A |
| Height Seated (Max) | 1.1mm |
| Length | 9.7mm |
| RoHS Status | Non-RoHS Compliant |
ADG707BRU-REEL7 Overview
Shipping overseas is convenient due to the electrical component's packing in 28-TSSOP (0.173, 4.40mm Width). This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have the same number of circuits 8:1. Extended operating temperature around -40°C~85°C TA. In total, there are 28 terminations. The electronic part provides high-quality output because it has 8 channels. Turning on and running the electrical part should be easy with a 2.5V voltage supply. The electronic part body is injected with 28 pins. It consists of 2 circuits. Search with ADG707 if you are looking for analog multiplexer variants. A 4.5Ohm internal resistance characterizes this multiplexer. For details about the functions of 28 pins, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. Users should never supply a voltage higher than 5.5V to a switch device. A low voltage of 1.8V should be applied to the electronic component. Integrated with DIFFERENTIAL MULTIPLEXER analog IC. Operating the 16 inputs requires 16 inputs. Don't forget the additional features of this electronic part, such as: CAN ALSO OPERATE WITH SINGLE 3V OR SINGLE 5V SUPPLIES.
ADG707BRU-REEL7 Features
8 Channels
-3db Bandwidth: 36MHz
Additional Features: CAN ALSO OPERATE WITH SINGLE 3V OR SINGLE 5V SUPPLIES
ADG707BRU-REEL7 Applications
There are a lot of Analog Devices Inc. ADG707BRU-REEL7 Analog Switches & Multiplexers ICs applications.
- PCMCIA cards
- Industrial and process control systems
- SDH/SONET multiplexers
- Cross Connects
- Medical systems
- Automotive applications
- Multiplexers
- Central office
- DSLAMs
- SONET
