ADG707BRUZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 28-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 2.5Ohm |
| Additional Feature | CAN ALSO OPERATE WITH SINGLE 3V OR SINGLE 5V SUPPLIES |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 5μW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADG707 |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 3/5/+-3V |
| Number of Channels | 8 |
| Interface | Parallel |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Operating Supply Current | 1μA |
| Nominal Supply Current | 1μA |
| Power Dissipation | 5μW |
| Number of Inputs | 16 |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±2.5V |
| Bandwidth | 36MHz |
| Supply Current-Max (Isup) | 0.001mA |
| Neg Supply Voltage-Nom (Vsup) | -2.5V |
| Turn-Off Delay Time | 10 ns |
| On-State Resistance (Max) | 4.5Ohm |
| High Level Output Current | 30mA |
| Dual Supply Voltage | 2.5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 80 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 13pF 90pF |
| On-state Resistance Match-Nom | 0.3Ohm |
| Switch Time (Ton, Toff) (Max) | 32ns, 16ns (Typ) |
| Charge Injection | 8pC |
| Crosstalk | -80dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 50ns |
| Drain to Source Resistance | 300mOhm |
| Signal Current-Max | 0.03A |
| Height | 1.05mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG707BRUZ Overview
The electronic part can be shipped overseas conveniently because it is packaged in 28-TSSOP (0.173, 4.40mm Width). Advanced packaging method Tube is used to provide high reliability. It is mounted in the position Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 8:1. Around -40°C~85°C TA is the extended operating temperature. In total, 28 terminations have occurred. A 8 channel electronic part produces high-quality output. It is safe to turn on and run the electronic component with a 2.5V voltage supply. This electrical component is included in the 28 series of products. Circuits number 2 make up this analogue multiplexer. Using the ADG707 search parameter, you can discover variants of the switch. It has an internal resistance of 2.5Ohm. To find out what the functions of 28 pins are, please refer to their datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. It is recommended to use 1.8V as the lowest voltage for the electrical part. In order to operate this switch device, it would need a current of 1μA. This product is integrated with an analog integrated circuit (IC) of type DIFFERENTIAL MULTIPLEXER. There is a voltage range of 5V operating voltages for the electrical part. In order to operate the 16 inputs, there are several steps to follow. 36MHz-bandwidths can be used to transfer data between multiplexers. Don't forget the additional features of this electronic part, such as: CAN ALSO OPERATE WITH SINGLE 3V OR SINGLE 5V SUPPLIES. There is 300mOhm Drain to Source resistance on this electronic part.
ADG707BRUZ Features
8 Channels
1μA Supply Current
Bandwidth: 36MHz
Additional Features: CAN ALSO OPERATE WITH SINGLE 3V OR SINGLE 5V SUPPLIES
Drain-to-Source resistance: 300mOhm
ADG707BRUZ Applications
There are a lot of Analog Devices Inc. ADG707BRUZ Analog Switches & Multiplexers ICs applications.
- Channel Banks
- USB 1.1 signal switching circuits
- Multi-Line E1 Interface Cards
- Microprocessor Controlled Analog Systems
- MP3 players
- High-Voltage
- Access Concentrators
- Automotive applications
- Sample-and-hold systems
- Precision instrumentation
