ADG708BRU-REEL
| Parameters | |
|---|---|
| Lead Free | Contains Lead |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 4.5Ohm |
| Max Power Dissipation | 5μW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG708 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 3/5/+-3V |
| Number of Channels | 8 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Operating Supply Current | 1nA |
| Power Dissipation | 5μW |
| Throw Configuration | DPST |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±2.5V |
| Supply Type | Dual, Single |
| Bandwidth | 55MHz |
| Neg Supply Voltage-Nom (Vsup) | -2.5V |
| Turn-Off Delay Time | 7 ns |
| On-State Resistance (Max) | 4.5Ohm |
| Dual Supply Voltage | 2.5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 60 dB |
| Current - Leakage (IS(off)) (Max) | 10pA Typ |
| Channel Capacitance (CS(off), CD(off)) | 13pF 85pF |
| On-state Resistance Match-Nom | 0.4Ohm |
| Switch Time (Ton, Toff) (Max) | 14ns, 8ns (Typ) |
| Charge Injection | 3pC |
| Channel-to-Channel Matching (ΔRon) | 400m Ω |
| Crosstalk | -80dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 25ns |
| Length | 5mm |
| RoHS Status | Non-RoHS Compliant |
ADG708BRU-REEL Overview
Due to its 16-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. High reliability is provided by advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have a ratio of 8:1. Operation at a temperature around -40°C~125°C TA. There are 16 terminations totally. High-quality output is provided by the electronic component's 8 channels. With a 2.5V voltage supply, the electrical component should be turned on and run. An injection of 16 pins is performed into the body of the electrical component. There are 1 circuits in this switch device. Look for analog switch ic variants by searching with ADG708. In this multiplexer, the internal resistance is 4.5Ohm. Please refer to the datasheets for 16 pins functions. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. An effective Dual, Single supply digital multiplexer. The lowest voltage the electronic part should receive is 1.8V. In order to operate this switch device, it would need a current of 1nA. The electrical part can be operated at 5V voltage levels. It is possible to transfer data over a 55MHz-bandwidth.
ADG708BRU-REEL Features
8 Channels
1nA Supply Current
Bandwidth: 55MHz
ADG708BRU-REEL Applications
There are a lot of Analog Devices Inc. ADG708BRU-REEL Analog Switches & Multiplexers ICs applications.
- PBX interfaces
- Isolation
- Wireless Local Loop
- Avionics
- Medical
- Battery Powered Instruments
- Microwave transmission systems
- Imaging
- Audio and video routing
- Cross Connects
