ADG708BRUZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 4.5Ohm |
| Max Power Dissipation | 5μW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG708 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 3/5/+-3V |
| Number of Channels | 8 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Operating Supply Current | 1nA |
| Nominal Supply Current | 1μA |
| Power Dissipation | 5μW |
| Throw Configuration | DPST |
| Logic Function | Multiplexer |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±2.5V |
| Supply Type | Dual, Single |
| Bandwidth | 55MHz |
| Neg Supply Voltage-Nom (Vsup) | -2.5V |
| Turn-Off Delay Time | 7 ns |
| On-State Resistance (Max) | 4.5Ohm |
| High Level Output Current | 30mA |
| Dual Supply Voltage | 2.5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 60 dB |
| Current - Leakage (IS(off)) (Max) | 10pA Typ |
| Channel Capacitance (CS(off), CD(off)) | 13pF 85pF |
| On-state Resistance Match-Nom | 0.4Ohm |
| Switch Time (Ton, Toff) (Max) | 14ns, 8ns (Typ) |
| Charge Injection | 3pC |
| Channel-to-Channel Matching (ΔRon) | 400m Ω |
| Crosstalk | -80dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 25ns |
| Height | 1.2mm |
| Length | 5.1mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG708BRUZ-REEL7 Overview
Shipping overseas is convenient with the electronic component packed in 16-TSSOP (0.173, 4.40mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a number of circuits 8:1. Extended operating temperature around -40°C~125°C TA. A total of 16 terminations have been recorded. A electrical component with 8 channels is capable of high-quality output. Turning on and running the electrical part should be easy with a 2.5V voltage supply. A key feature of the 16 series is the inclusion of this electronic part as part of its design. There are 1 circuits in this multiplexer. Look for analog switch ic variants by searching with ADG708. It has an internal resistance of 4.5Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. A voltage higher than 5.5V should not normally be supplied to the switches. The analog switch ic is of the Dual, Single supply type and is cost-effective. It is recommended to use 1.8V as the lowest voltage for the electrical part. 1nA current would be enough for this multiplexer to operate. It can operate from 5V operating voltages. It is possible to operate 8 inputs. This switch operates within the bandwidth of 55MHz.
ADG708BRUZ-REEL7 Features
8 Channels
1nA Supply Current
Bandwidth: 55MHz
ADG708BRUZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG708BRUZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Cellular phones
- Digital Cross-Connects
- FTTH
- Public switching systems
- Microprocessor Controlled Analog Systems
- SDH/SONET multiplexers
- Communication systems
- HDTV
- Sample-and-hold systems
- Precision instrumentation
