ADG708CRU-REEL7
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 4.5Ohm |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG708 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 3/5/+-3V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Throw Configuration | DPST |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±2.5V |
| Neg Supply Voltage-Nom (Vsup) | -2.5V |
| -3db Bandwidth | 55MHz |
| On-State Resistance (Max) | 4.5Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 60 dB |
| Current - Leakage (IS(off)) (Max) | 10pA Typ |
| Channel Capacitance (CS(off), CD(off)) | 13pF 85pF |
| On-state Resistance Match-Nom | 0.4Ohm |
| Switch Time (Ton, Toff) (Max) | 14ns, 8ns (Typ) |
| Charge Injection | 3pC |
| Channel-to-Channel Matching (ΔRon) | 400m Ω |
| Crosstalk | -80dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 25ns |
| Signal Current-Max | 0.03A |
| Length | 5mm |
| RoHS Status | Non-RoHS Compliant |
ADG708CRU-REEL7 Overview
Packed in 16-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. Multiplexers like this are mounted in the Surface Mount position. In the multiplexer and demultiplexer, 8:1 represents the number of circuits. Increasing operating temperature to around -40°C~125°C TA. 16 terminations have been made so far. A high-quality output is provided by the electrical component's 8 channels. With a 2.5V voltage supply, the electrical component should be turned on and run. A total of 16 pins are injected into the electrical part body. 1 circuits are used in this analogue multiplexer. Use ADG708 to search for variants of the digital switches. A 4.5Ohm internal resistance characterizes this multiplexer. To find out what the functions of 16 pins are, please refer to their datasheets. This switch device is a typical Multiplexer or Switches. An analog IC with the number SINGLE-ENDED MULTIPLEXER is integrated into this board.
ADG708CRU-REEL7 Features
8 Channels
-3db Bandwidth: 55MHz
ADG708CRU-REEL7 Applications
There are a lot of Analog Devices Inc. ADG708CRU-REEL7 Analog Switches & Multiplexers ICs applications.
- Digital Cross-Connects
- Ultrasound
- New designs requiring multiplexer functions
- Battery Powered Instruments
- Central office
- FTTH
- Channel Banks
- Transmit
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- E1 Network Equipment
