ADG708CRUZ-REEL7
| Parameters | |
|---|---|
| Base Part Number | ADG708 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Channels | 8 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Operating Supply Current | 1nA |
| Nominal Supply Current | 1μA |
| Power Dissipation | 5μW |
| Throw Configuration | DPST |
| Logic Function | Multiplexer |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±2.5V |
| Supply Type | Dual, Single |
| Bandwidth | 55MHz |
| Neg Supply Voltage-Nom (Vsup) | -2.5V |
| Turn-Off Delay Time | 7 ns |
| On-State Resistance (Max) | 4.5Ohm |
| High Level Output Current | 30mA |
| Dual Supply Voltage | 2.5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 60 dB |
| Current - Leakage (IS(off)) (Max) | 10pA Typ |
| Channel Capacitance (CS(off), CD(off)) | 13pF 85pF |
| On-state Resistance Match-Nom | 0.4Ohm |
| Switch Time (Ton, Toff) (Max) | 14ns, 8ns (Typ) |
| Charge Injection | 3pC |
| Channel-to-Channel Matching (ΔRon) | 400m Ω |
| Crosstalk | -80dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 25ns |
| Signal Current-Max | 0.03A |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 4.5Ohm |
| Max Power Dissipation | 5μW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
ADG708CRUZ-REEL7 Overview
This electronic part is conveniently packaged in 16-TSSOP (0.173, 4.40mm Width), making it easy to ship abroad. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. It is mounted in the position Surface Mount. There is 8:1 ratio between the number of multiplexers and demultiplexers. An extended operating temperature of -40°C~125°C TA degrees Celsius. Total terminations are 16. As a result of its 8 channels, this electronic component provides high-quality output. It is safe to turn on and run the electronic component with a 2.5V voltage supply. The electronic part body is injected with 16 pins. The circuits in this analogue multiplexer number 1. Using the ADG708 search parameter, you can discover variants of the switch. Internally, this switch multiplexer has a resistance of 4.5Ohm. To find out what the 16 pins do, please refer to the datasheets. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. Dual, Single supply type digital switch with a low cost. It is recommended to use 1.8V as the lowest voltage for the electrical part. For this multiplexer to operate, 1nA current would be sufficient. Operating voltages range from 5V. Operating the 8 inputs requires 8 inputs. A 55MHz-bandwidth can be used for data transfer.
ADG708CRUZ-REEL7 Features
8 Channels
1nA Supply Current
Bandwidth: 55MHz
ADG708CRUZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG708CRUZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Digital cross connects (DSX-1)
- Residential Gateways, Home Gateway/Router
- Medical Instrumentation
- HDTV
- Voice over IP/DSL – Integrated Access Devices, Smart
- Private Branch Exchange (PBX)
- FTTH
- Audio and video signal routing
- PBXs
- Fiber In The Loop (FITL)
