ADG709CRUZ
| Parameters | |
|---|---|
| Nominal Supply Current | 1μA |
| Power Dissipation | 5μW |
| Throw Configuration | 4PST |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±2.5V |
| Bandwidth | 55MHz |
| Neg Supply Voltage-Nom (Vsup) | -2.5V |
| Turn-Off Delay Time | 7 ns |
| On-State Resistance (Max) | 4.5Ohm |
| Dual Supply Voltage | 2.5V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 60 dB |
| Current - Leakage (IS(off)) (Max) | 10pA Typ |
| Channel Capacitance (CS(off), CD(off)) | 13pF 42pF |
| On-state Resistance Match-Nom | 0.4Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 14ns, 8ns (Typ) |
| Charge Injection | 3pC |
| Channel-to-Channel Matching (ΔRon) | 400m Ω |
| Crosstalk | -80dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Drain to Source Resistance | 4.5Ohm |
| Signal Current-Max | 0.03A |
| Height | 1.05mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 4.5Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 5μW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG709 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 3/5/+-3V |
| Number of Channels | 1 |
| Interface | Parallel |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
ADG709CRUZ Overview
The electronic component is convenient to ship overseas because it is packed in a 16-TSSOP (0.173, 4.40mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. Multiplexers like this are mounted in the Surface Mount position. In the multiplexer and demultiplexer, 4:1 represents the number of circuits. An extended operating temperature of -40°C~125°C TA degrees Celsius. 16 terminations have been made so far. By its 1 channels, the electronic component provides high-quality output. If the voltage supply is 2.5V volts, the electrical component should be turned on and run. It is injected into the electrical part body with 16 pins. SP4T switching circuits are used in these analog switch ics. It consists of 2 circuits. Using the ADG709 search parameter, you can discover variants of the switch. In this multiplexer, the internal resistance is 4.5Ohm. The datasheets for the 16 pins explain the functions. The analogue multiplexer in this example is a typical Multiplexer or Switches. Users shouldn't supply more than 5.5V voltage to the switch device. 1.8V is the lowest voltage that should be fed to the electronic electronic part. It is integrated with a DIFFERENTIAL MULTIPLEXER analog IC. There is a voltage range of 5V operating voltages for the electrical part. A 8 input needs to be operated. This switch operates within the bandwidth of 55MHz. It has a Drain to Source resistance of 4.5Ohm ohms.
ADG709CRUZ Features
1 Channels
Switch Circuit: SP4T
Bandwidth: 55MHz
Drain-to-Source resistance: 4.5Ohm
ADG709CRUZ Applications
There are a lot of Analog Devices Inc. ADG709CRUZ Analog Switches & Multiplexers ICs applications.
- Isolation
- Cellular phones
- DSUs
- Data switching
- Communication systems
- Imaging
- Video switching
- Communication systems
- PBXs
- Remote wireless modules
