ADG711BRUZ

11ns, 6ns (Typ) SPST - NO 4Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG711 16 Pins 100pA 3V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG711BRUZ
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 432
Description: 11ns, 6ns (Typ) SPST - NO 4Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG711 16 Pins 100pA 3V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 1 month ago)
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	4Ohm
Additional Feature	CAN ALSO OPERATE WITH 5 V SUPPLY
Subcategory	Multiplexer or Switches
Max Power Dissipation	430mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	3V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG711
Pin Count	16
Polarity	Inverting, Non-Inverting
Power Supplies	3/5V
Number of Channels	4
Interface	Parallel
Max Supply Voltage	5.5V
Min Supply Voltage	1.8V
Operating Supply Current	1nA
Nominal Supply Current	1nA
Power Dissipation	5μW
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	11 ns
Bandwidth	200MHz
Turn-Off Delay Time	6 ns
On-State Resistance (Max)	4Ohm
High Level Output Current	30mA
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	58 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	10pF 10pF
On-state Resistance Match-Nom	0.1Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	11ns, 6ns (Typ)
Charge Injection	3pC
Crosstalk	-90dB @ 10MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	20ns
Switch-off Time-Max	12ns
Voltage - Supply, Single (V+)	1.8V~5.5V
Max Junction Temperature (Tj)	150°C
Drain to Source Resistance	2.5Ohm
Normal Position	NC
On-State Resistance	2.5Ohm
Height	1.2mm
Length	5mm
Width	4.4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG711BRUZ Overview

As the electronic part is packed in 16-TSSOP (0.173, 4.40mm Width), international shipping is convenient. The advanced packaging method Tube provides high reliability. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 1:1. Operating temperature around -40°C~85°C TA extended. Total terminations are 16. Due to its 4 channels, the electrical component produces high-quality output. An 3V voltage supply should allow the electrical part to be turned on and run. It is injected into the electrical part body with 16 pins. These analog multiplexers are built based on SPST - NO switching circuits. ADG711 can be used to search for analog multiplexer variants. A 4Ohm internal resistance characterizes this multiplexer. For details about the functions of 16 pins, please refer to the datasheets. Multiplexer or Switches is a typical switch device. Users shouldn't supply more than 5.5V voltage to the switch device. There should be 1.8V voltage fed to the electrical part below 1.8V. The switch device would be able to operate with 1nA current. Using only a single voltage supply, this analog switch requires 1.8V~5.5V voltage. When the digital multiplexer is charged above 1μA, damage can occur. A 200MHz-bandwidth can be used for data transfer. Additional features of the electronic component include: CAN ALSO OPERATE WITH 5 V SUPPLY. There is 2.5Ohm Drain to Source resistance on this electronic part.

ADG711BRUZ Features

4 Channels
Switch Circuit: SPST - NO
1nA Supply Current
Bandwidth: 200MHz
Additional Features: CAN ALSO OPERATE WITH 5 V SUPPLY
Drain-to-Source resistance: 2.5Ohm