ADG711WBRUZ-REEL
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 4Ohm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 5μW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Terminal Pitch | 0.635mm |
| Base Part Number | ADG711 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 3/5V |
| Interface | Parallel |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Operating Supply Current | 1nA |
| Power Dissipation | 5μW |
| Max Supply Current | 1μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 11 ns |
| Number of Inputs | 4 |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Turn-Off Delay Time | 6 ns |
| On-State Resistance (Max) | 4Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 10pF 10pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 11ns, 6ns (Typ) |
| Charge Injection | 3pC |
| Crosstalk | -90dB @ 10MHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 1.8V~5.5V |
| Normal Position | NO |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
ADG711WBRUZ-REEL Overview
As the electronic part is packed in 16-TSSOP (0.173, 4.40mm Width), international shipping is convenient. This packaging method provides high reliability because it uses advanced packaging techniques. Surface Mount is where this multiplexer is located. Multiplexer and demultiplexer circuits have a number 1:1. Temperatures around -40°C~85°C TA are extended for operation. The total number of terminations is 16. An electrical component like this is included in the 16 series. SPST - NC switching circuits are used in these analog switch ics. Look for analog switch ic variants by searching with ADG711. It has an internal resistance of 4Ohm. For details about the functions of 16 pins, please refer to the datasheets. Multiplexer or Switches is a typical switch device. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. An effective Single supply digital multiplexer. There should be 1.8V voltage fed to the electrical part below 1.8V. The switch device would be able to operate with 1nA current. An analogue multiplexer drains from a single voltage supply at 1.8V~5.5V. A voltage higher than 1μA may cause damage to the switch multiplexer. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. The electrical component supports 4 inputs. 200MHz bandwidths enable data to be transferred. From the Automotive series.
ADG711WBRUZ-REEL Features
Switch Circuit: SPST - NC
1nA Supply Current
Bandwidth: 200MHz
ADG711WBRUZ-REEL Applications
There are a lot of Analog Devices Inc. ADG711WBRUZ-REEL Analog Switches & Multiplexers ICs applications.
- DSLAMs
- E1 Network Equipment
- Ultrasound
- Low-Voltage
- Multiplexers
- Precision data acquisition
- DVD-R
- Relay Replacement
- Routers
- Wireless Local Loop
