Parameters |
Contact Plating |
Lead, Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
4Ohm |
Terminal Finish |
Tin/Lead (Sn85Pb15) |
Additional Feature |
CAN ALSO OPERATE WITH 5 V SUPPLY |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
430mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
4 |
Supply Voltage |
3V |
Time@Peak Reflow Temperature-Max (s) |
20 |
Base Part Number |
ADG712 |
Pin Count |
16 |
Polarity |
Non-Inverting |
Power Supplies |
3/5V |
Number of Channels |
4 |
Interface |
Parallel |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1.8V |
Operating Supply Current |
1nA |
Nominal Supply Current |
1μA |
Power Dissipation |
5μW |
Max Supply Current |
1μA |
Throw Configuration |
SPST |
Turn On Delay Time |
16 ns |
Supply Type |
Single |
Bandwidth |
200MHz |
Turn-Off Delay Time |
10 ns |
On-State Resistance (Max) |
4Ohm |
High Level Output Current |
30mA |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
58 dB |
Current - Leakage (IS(off)) (Max) |
100pA |
Channel Capacitance (CS(off), CD(off)) |
10pF 10pF |
On-state Resistance Match-Nom |
0.1Ohm |
Switch Circuit |
SPST - NO |
Switch Time (Ton, Toff) (Max) |
11ns, 6ns (Typ) |
Charge Injection |
3pC |
Crosstalk |
-90dB @ 10MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
20ns |
Switch-off Time-Max |
12ns |
Voltage - Supply, Single (V+) |
1.8V~5.5V |
Normal Position |
NO |
Height |
1.05mm |
Length |
5mm |
Width |
4.4mm |
Radiation Hardening |
No |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
ADG712BRU Overview
Due to its 16-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. This high-reliability packaging method uses advanced packaging methods Tube. Mounted in Surface Mount is this multiplexer. Multiplexer and demultiplexer circuits have a number 1:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. In total, there have been 16 terminations. The electronic part provides high-quality output because it has 4 channels. If the voltage supply is 3V volts, the electrical component should be turned on and run. An electrical component like this is included in the 16 series. The analog switch ics are built using SPST - NO switching circuits. Using the ADG712 search parameter, you can discover variants of the switch. An switch multiplexer with 4Ohm internal resistance has a value of 4Ohm. To find out what the 16 pins do, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. An effective Single supply digital multiplexer. It is recommended that the electrical component receives a voltage of 1.8V. In order to operate this switch device, it would need a current of 1nA. A voltage of 1.8V~5.5V is required to drain this analog switch from a single voltage supply. When the digital multiplexer is charged above 1μA, damage can occur. The data can be transferred over a wide range of bandwidths, called 200MHz bandwidths. Check out the electrical component's additional features, such as the following: CAN ALSO OPERATE WITH 5 V SUPPLY.
ADG712BRU Features
4 Channels
Switch Circuit: SPST - NO
1nA Supply Current
Bandwidth: 200MHz
Additional Features: CAN ALSO OPERATE WITH 5 V SUPPLY
ADG712BRU Applications
There are a lot of Analog Devices Inc. ADG712BRU Analog Switches & Multiplexers ICs applications.
- Industrial and process control systems
- PBXs
- Battery Powered Systems
- Data Acquisition Systems
- Medical systems
- Automotive applications
- Transmit
- Residential Gateways, Home Gateway/Router
- RGB switches
- Audio signal routing