Parameters |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
3V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADG712 |
Pin Count |
16 |
Polarity |
Non-Inverting |
Power Supplies |
3/5V |
Number of Channels |
4 |
Interface |
Parallel |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1.8V |
Operating Supply Current |
1nA |
Nominal Supply Current |
1μA |
Power Dissipation |
5μW |
Max Supply Current |
1μA |
Throw Configuration |
SPST |
Turn On Delay Time |
11 ns |
Supply Type |
Single |
Bandwidth |
200MHz |
Turn-Off Delay Time |
6 ns |
On-State Resistance (Max) |
4Ohm |
High Level Output Current |
30mA |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
58 dB |
Current - Leakage (IS(off)) (Max) |
100pA |
Channel Capacitance (CS(off), CD(off)) |
10pF 10pF |
On-state Resistance Match-Nom |
0.1Ohm |
Switch Circuit |
SPST - NO |
Switch Time (Ton, Toff) (Max) |
11ns, 6ns (Typ) |
Charge Injection |
3pC |
Crosstalk |
-90dB @ 10MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
20ns |
Switch-off Time-Max |
12ns |
Voltage - Supply, Single (V+) |
1.8V~5.5V |
Normal Position |
NO |
Height |
1.2mm |
Length |
5.1mm |
Width |
4.5mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 weeks ago) |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
4Ohm |
Additional Feature |
CAN ALSO OPERATE WITH 5 V SUPPLY |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
5μW |
ADG712BRUZ-REEL7 Overview
This electronic part is conveniently packaged in 16-TSSOP (0.173, 4.40mm Width), making it easy to ship abroad. The advanced packaging method Tape & Reel (TR) provides high reliability. In Surface Mount, this analog switch is mounted. 1:1 is the ratio of multiplexer to demultiplexer circuits. Increasing operating temperature to around -40°C~85°C TA. There are 16 terminations totally. Due to its 4 channels, the electrical component produces high-quality output. When a voltage supply of 3V is used, the electronic component should be turned on and run. As part of its design, the 16 series is equipped with this electronic component. Circuits based on SPST - NO switching are used to construct these analog switch ics. Try searching with ADG712 if you're looking for variants. In this multiplexer, the internal resistance is 4Ohm. Please refer to the datasheets for 16 pins functions. This switch device is a typical Multiplexer or Switches. Users shouldn't supply more than 5.5V voltage to the switch device. A cost-effective Single supply type analogue multiplexer. It is recommended to use 1.8V as the lowest voltage for the electrical part. In order to operate this switch device, it would need a current of 1nA. Analogue multiplexers require a 1.8V~5.5V voltage to drain from a single voltage supply. The switch multiplexer may be damaged if it is exposed to voltage greater than 1μA. The transfer of data can be performed over 200MHz bandwidths. You shouldn't miss the additional features of the electrical component, such as: CAN ALSO OPERATE WITH 5 V SUPPLY.
ADG712BRUZ-REEL7 Features
4 Channels
Switch Circuit: SPST - NO
1nA Supply Current
Bandwidth: 200MHz
Additional Features: CAN ALSO OPERATE WITH 5 V SUPPLY
ADG712BRUZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG712BRUZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Microprocessor Controlled Analog Systems
- Audio/video switches
- Data Acquisition Systems
- Communication systems
- PDAs
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Battery-powered systems
- Cellular phones
- Fault Tolerant Systems
- Digital access cross connects