ADG713BRUZ

11ns, 6ns (Typ) SPST - NO/NC 4Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG713 16 Pins 100pA 3V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG713BRUZ
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 958
Description: 11ns, 6ns (Typ) SPST - NO/NC 4Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG713 16 Pins 100pA 3V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	20ns
Switch-off Time-Max	12ns
Voltage - Supply, Single (V+)	1.8V~5.5V
Drain to Source Resistance	2.5Ohm
Height	1.05mm
Length	5mm
Width	4.4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 3 weeks ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	4Ohm
Terminal Finish	Matte Tin (Sn)
Additional Feature	CAN ALSO OPERATE WITH 5 V SUPPLY
Subcategory	Multiplexer or Switches
Max Power Dissipation	5μW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	3V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG713
Pin Count	16
Polarity	Non-Inverting
Power Supplies	3/5V
Number of Channels	4
Interface	Parallel
Max Supply Voltage	5.5V
Min Supply Voltage	1.8V
Operating Supply Current	1nA
Nominal Supply Current	1μA
Power Dissipation	5μW
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	11 ns
Bandwidth	200MHz
Turn-Off Delay Time	6 ns
On-State Resistance (Max)	4Ohm
High Level Output Current	30mA
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	58 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	10pF 10pF
On-state Resistance Match-Nom	0.1Ohm
Switch Circuit	SPST - NO/NC
Switch Time (Ton, Toff) (Max)	11ns, 6ns (Typ)
Charge Injection	3pC
Crosstalk	-90dB @ 10MHz

ADG713BRUZ Overview

This electronic part is conveniently packaged in 16-TSSOP (0.173, 4.40mm Width), making it easy to ship abroad. In order to provide high reliability, an advanced packaging method Tube is used. In Surface Mount, you'll find this switch device. 1:1 is the ratio between multiplexers and demultiplexers. Operating temperature around -40°C~85°C TA extended. A total of 16 terminations have been recorded. The electronic part delivers high-quality output through its 4 channels. Powered by a 3V voltage supply, the electrical part should be switched on and run. As part of the design of the 16 series, this electronic part has been incorporated into the system. Circuits based on SPST - NO/NC switching are used to construct these analog switch ics. Using the ADG713 search parameter, you can discover variants of the switch. There is 4Ohm internal resistance in this digital multiplexer. Datasheets for 16 pin functions are available upon request. Multiplexer or Switches is a typical switch device. normally, users should not supply switches with voltages higher than 5.5V. It is recommended to use 1.8V as the lowest voltage for the electrical part. This multiplexer would work with 1nA current. Using only a single voltage supply, this analog switch requires 1.8V~5.5V voltage. If you put voltage higher than 1μA on the digital multiplexer, damage may occur. There are 200MHz bandwidths for data transfer. Don't miss this electronic component's additional features, such as: CAN ALSO OPERATE WITH 5 V SUPPLY. There is 2.5Ohm resistance between the Drain and Source on this part.

ADG713BRUZ Features

4 Channels
Switch Circuit: SPST - NO/NC
1nA Supply Current
Bandwidth: 200MHz
Additional Features: CAN ALSO OPERATE WITH 5 V SUPPLY
Drain-to-Source resistance: 2.5Ohm