ADG713BRZ

11ns, 6ns (Typ) SPST - NO/NC 4Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG713 16 Pins 100pA 3V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG713BRZ
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 876
Description: 11ns, 6ns (Typ) SPST - NO/NC 4Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG713 16 Pins 100pA 3V 16-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG713
Output	SEPARATE OUTPUT
Pin Count	16
Power Supplies	3/5V
Number of Channels	4
Interface	Parallel
Max Supply Voltage	5.5V
Min Supply Voltage	1.8V
Power Dissipation	5μW
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	11 ns
Bandwidth	200MHz
Turn-Off Delay Time	6 ns
On-State Resistance (Max)	4Ohm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	58 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	10pF 10pF
On-state Resistance Match-Nom	0.1Ohm
Switch Circuit	SPST - NO/NC
Switch Time (Ton, Toff) (Max)	11ns, 6ns (Typ)
Charge Injection	3pC
Crosstalk	-90dB @ 10MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	20ns
Switch-off Time-Max	12ns
Voltage - Supply, Single (V+)	1.8V~5.5V
Drain to Source Resistance	2.5Ohm
Height	1.5mm
Length	10mm
Width	4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 3 weeks ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	4Ohm
Terminal Finish	Matte Tin (Sn)
Additional Feature	CAN ALSO OPERATE WITH 5 V SUPPLY
Subcategory	Multiplexer or Switches
Max Power Dissipation	5μW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	3V
Terminal Pitch	1.27mm

ADG713BRZ Overview

Presented in 16-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. A high level of reliability can be achieved through the use of an advanced packaging method Tube. A switch device like this is mounted in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Temperatures around -40°C~85°C TA are extended for operation. Totally, there are 16 terminations. By its 4 channels, the electronic component provides high-quality output. A 3V voltage supply should turn on and run the electronic component. An injection of 16 pins is performed into the body of the electrical component. The analog switch ics are built using SPST - NO/NC switching circuits. Look for analog switch ic variants by searching with ADG713. There is 4Ohm internal resistance in this digital multiplexer. For details about the functions of 16 pins, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. 1.8V is the lowest voltage that should be fed to the electronic electronic part. A voltage of 1.8V~5.5V is required to drain this analog switch from a single voltage supply. It may damage the digital multiplexer if the voltage is higher than 1μA. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. In 200MHz-bandwidths, data can be transferred. This electronic part has additional features, such as: CAN ALSO OPERATE WITH 5 V SUPPLY. The Drain to Source resistance of this electronic component is 2.5Ohm.