ADG713BRZ-REEL

11ns, 6ns (Typ) SPST - NO/NC 4Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG713 16 Pins 100pA 3V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG713BRZ-REEL
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 958
Description: 11ns, 6ns (Typ) SPST - NO/NC 4Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG713 16 Pins 100pA 3V 16-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 3 weeks ago)
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	4Ohm
Additional Feature	CAN ALSO OPERATE WITH 5 V SUPPLY
Subcategory	Multiplexer or Switches
Max Power Dissipation	5μW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	3V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG713
Pin Count	16
Qualification Status	Not Qualified
Polarity	Non-Inverting
Power Supplies	3/5V
Number of Channels	4
Interface	Parallel
Max Supply Voltage	5.5V
Min Supply Voltage	1.8V
Operating Supply Current	1nA
Power Dissipation	5μW
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	11 ns
Supply Type	Single
Bandwidth	200MHz
Turn-Off Delay Time	6 ns
On-State Resistance (Max)	4Ohm
High Level Output Current	30mA
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	58 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	10pF 10pF
On-state Resistance Match-Nom	0.1Ohm
Switch Circuit	SPST - NO/NC
Switch Time (Ton, Toff) (Max)	11ns, 6ns (Typ)
Charge Injection	3pC
Crosstalk	-90dB @ 10MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	20ns
Switch-off Time-Max	12ns
Voltage - Supply, Single (V+)	1.8V~5.5V
Height Seated (Max)	1.75mm
Length	9.9mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG713BRZ-REEL Overview

Packed in 16-SOIC (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. The advanced packaging method Tape & Reel (TR) provides high reliability. Multiplexers like this are mounted in the Surface Mount position. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Around -40°C~85°C TA is the extended operating temperature. Total terminations are 16. As a result of its 4 channels, this electronic component provides high-quality output. An 3V voltage supply should allow the electrical part to be turned on and run. A total of 16 pins are injected into the electrical part body. The analog switch ics are built using SPST - NO/NC switching circuits. Try searching with ADG713 to find analog multiplexer variants. The internal resistance of this digital multiplexer is 4Ohm. You can find the functions of the 16 pins in the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. A voltage higher than 5.5V should not normally be supplied to the switches. Single supply type digital switch with a low cost. There should be 1.8V voltage fed to the electrical part below 1.8V. An operating current of 1nA would be sufficient for this switch device. Draining from a single voltage supply, this analog switch requires a voltage of 1.8V~5.5V. If put voltage greater than 1μA on the device, damage may be caused to the analogue multiplexer. In 200MHz-bandwidths, data can be transferred. Don't miss this electronic component's additional features, such as: CAN ALSO OPERATE WITH 5 V SUPPLY.