ADG714BRUZ-REEL

20ns, 8ns (Typ) SPST - NO 4.5Ohm Analog Switches BREAK-BEFORE-MAKE ADG714 24 Pins 100pA 2.5V 24-TSSOP (0.173, 4.40mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG714BRUZ-REEL
Package: 24-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 957
Description: 20ns, 8ns (Typ) SPST - NO 4.5Ohm Analog Switches BREAK-BEFORE-MAKE ADG714 24 Pins 100pA 2.5V 24-TSSOP (0.173, 4.40mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 4 weeks ago)
Mounting Type	Surface Mount
Package / Case	24-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	24
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	24
ECCN Code	EAR99
Resistance	4.5Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	125μW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	8
Supply Voltage	2.5V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	ADG714
Output	SEPARATE OUTPUT
Pin Count	24
Qualification Status	Not Qualified
Power Supplies	3/5/+-3V
Number of Channels	8
Interface	Serial
Max Supply Voltage	5.5V
Min Supply Voltage	2.7V
Operating Supply Current	10μA
Power Dissipation	125μW
Max Supply Current	20μA
Throw Configuration	SPST
Turn On Delay Time	32 ns
Voltage - Supply, Single/Dual (±)	2.7V~5.5V ±2.5V
Supply Type	Dual, Single
Bandwidth	155MHz
Neg Supply Voltage-Nom (Vsup)	-2.5V
Turn-Off Delay Time	15 ns
Max Dual Supply Voltage	2.75V
On-State Resistance (Max)	4.5Ohm
Min Dual Supply Voltage	2.25V
Dual Supply Voltage	2.5V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	60 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	11pF 11pF
On-state Resistance Match-Nom	0.4Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	20ns, 8ns (Typ)
Charge Injection	3pC
Crosstalk	-90dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Normal Position	NC
Height Seated (Max)	1.2mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG714BRUZ-REEL Overview

Due to its 24-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. The advanced packaging method Tape & Reel (TR) provides high reliability. This analog switch is mounted in Surface Mount. 1:1 is the ratio between multiplexers and demultiplexers. The operating temperature is extended to around -40°C~85°C TA. Total terminations are 24. The electronic part provides high-quality output because it has 8 channels. An 2.5V voltage supply should allow the electrical part to be turned on and run. A total of 24 pins are injected into the body of the electronic part. Unlike digital switches, these are based on SPST - NO switching circuits. If you are looking for variants of the digital switch, trying search with ADG714. In this multiplexer, the internal resistance is 4.5Ohm. The datasheets for the 24 pins explain the functions. The analog multiplexer shown here is a typical Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. An effective Dual, Single supply digital multiplexer. 2.7V is the lowest voltage the electrical component should receive. It would be sufficient to run this analogue multiplexer with 10μA current. Putting voltage greater than 20μA on the multiplexer may cause damage. Despite this switch device's dual supply capability, its voltage should not exceed 2.75V. If you are using dual power supplies, you should attach at least 2.25V. The digital multiplexer has SEPARATE OUTPUT outputs that can be used. In 155MHz-bandwidths, data can be transferred.