ADG714BRUZ-REEL7

20ns, 8ns (Typ) SPST - NO 4.5Ohm Analog Switches BREAK-BEFORE-MAKE ADG714 24 Pins 100pA 2.5V 24-TSSOP (0.173, 4.40mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG714BRUZ-REEL7
Package: 24-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 606
Description: 20ns, 8ns (Typ) SPST - NO 4.5Ohm Analog Switches BREAK-BEFORE-MAKE ADG714 24 Pins 100pA 2.5V 24-TSSOP (0.173, 4.40mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 4 weeks ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	24-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	24
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	24
ECCN Code	EAR99
Resistance	4.5Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	125μW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	8
Supply Voltage	2.5V
Terminal Pitch	0.65mm
Frequency	30MHz
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	ADG714
Pin Count	24
Number of Outputs	1
Power Supplies	3/5/+-3V
Number of Channels	8
Interface	Serial
Max Supply Voltage	5.5V
Min Supply Voltage	2.7V
Operating Supply Current	10μA
Nominal Supply Current	30mA
Power Dissipation	125μW
Max Supply Current	20μA
Throw Configuration	SPST
Turn On Delay Time	32 ns
Voltage - Supply, Single/Dual (±)	2.7V~5.5V ±2.5V
Supply Type	Dual, Single
Bandwidth	155MHz
Neg Supply Voltage-Nom (Vsup)	-2.5V
Turn-Off Delay Time	15 ns
Max Dual Supply Voltage	2.75V
On-State Resistance (Max)	4.5Ohm
Min Dual Supply Voltage	2.25V
High Level Output Current	30mA
Dual Supply Voltage	2.5V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	60 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	11pF 11pF
On-state Resistance Match-Nom	0.4Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	20ns, 8ns (Typ)
Charge Injection	3pC
Crosstalk	-90dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Max Junction Temperature (Tj)	150°C
Normal Position	NC
Height	1.2mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG714BRUZ-REEL7 Overview

Due to its 24-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. High reliability is ensured by the advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. Multiplexers and demultiplexers have the same number of circuits 1:1. Extended operating temperature around -40°C~85°C TA. Totally, there are 24 terminations. A 8 channel electronic part produces high-quality output. If the voltage supply is 2.5V volts, the electrical component should be turned on and run. This electronic part can be found in the 24 series. On the other hand, analog switches can be constructed using SPST - NO switching circuits. Try searching for the analog switch ic with ADG714 if you are looking for variants. In this multiplexer, the internal resistance is 4.5Ohm. For functions related to 24 pins, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. Users shouldn't supply more than 5.5V voltage to the switch device. Dual, Single supply type digital switch with a low cost. 2.7V is the lowest voltage that should be fed to the electronic electronic part. For this multiplexer to operate, 10μA current would be sufficient. Putting voltage greater than 20μA on the multiplexer may cause damage. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 2.75V. If you are using a dual power supply, you should attach at least 2.25V. The transfer of data can be performed over 155MHz bandwidths. An output of 1 is provided by the digital multiplexer.