ADG715BRUZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 4.5Ohm |
| Max Power Dissipation | 125μW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 8 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG715 |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Number of Channels | 8 |
| Interface | Serial |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 10μA |
| Power Dissipation | 125μW |
| Max Supply Current | 20μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 140 ns |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V ±2.5V |
| Supply Type | Dual, Single |
| Bandwidth | 155MHz |
| Neg Supply Voltage-Nom (Vsup) | -2.5V |
| Turn-Off Delay Time | 130 ns |
| Max Dual Supply Voltage | 2.75V |
| On-State Resistance (Max) | 4.5Ohm |
| Min Dual Supply Voltage | 2.25V |
| High Level Output Current | 30mA |
| Dual Supply Voltage | 2.5V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 60 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 11pF 11pF |
| On-state Resistance Match-Nom | 0.4Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 20ns, 8ns (Typ) |
| Charge Injection | 3pC |
| Crosstalk | -90dB @ 1MHz |
| Switch-on Time-Max | 200ns |
| Switch-off Time-Max | 190ns |
| Height Seated (Max) | 1.2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG715BRUZ-REEL Overview
The electronic component is convenient to ship overseas because it is packed in a 24-TSSOP (0.173, 4.40mm Width). Advanced packaging method Tape & Reel (TR) is used to provide high reliability. It is mounted in the position Surface Mount. 1:1 is the ratio of multiplexer to demultiplexer circuits. Around -40°C~85°C TA is the extended operating temperature. There are 24 terminations totally. This electronic part offers high-quality output due to its 8 channels. Turning on and running the electrical part should be easy with a 2.5V voltage supply. This electronic part can be found in the 24 series. The analog switch ics are built using SPST - NO switching circuits. Try searching with ADG715 to find analog multiplexer variants. Analog switches have 4.5Ohm internal resistance. Datasheets for 24 pin functions are available upon request. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. The analog switch ic is of the Dual, Single supply type and is cost-effective. The lowest voltage fed to the electronic component should be 2.7V. The switch device would be able to operate with 10μA current. If put voltage greater than 20μA on the device, damage may be caused to the analogue multiplexer. Despite this switch's dual supply capability, its voltage should not exceed 2.75V. A dual power supply should have at least 2.25V voltage attached. 155MHz-bandwidths can be used to transfer data between multiplexers.
ADG715BRUZ-REEL Features
8 Channels
Switch Circuit: SPST - NO
10μA Supply Current
Bandwidth: 155MHz
ADG715BRUZ-REEL Applications
There are a lot of Analog Devices Inc. ADG715BRUZ-REEL Analog Switches & Multiplexers ICs applications.
- Routers
- Access Concentrators
- Fiber In The Loop (FITL)
- PBXs
- Data Acquisition Systems
- Imaging
- Audio/video switches
- Digital Cross-Connects
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Automotive applications
