Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 4 weeks ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
24-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
24 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
24 |
ECCN Code |
EAR99 |
Resistance |
4.5Ohm |
Terminal Finish |
Matte Tin (Sn) |
Max Power Dissipation |
125μW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
8 |
Supply Voltage |
2.5V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADG715 |
Pin Count |
24 |
Qualification Status |
Not Qualified |
Number of Channels |
8 |
Interface |
Serial |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
2.7V |
Operating Supply Current |
10μA |
Power Dissipation |
125μW |
Max Supply Current |
20μA |
Throw Configuration |
SPST |
Turn On Delay Time |
140 ns |
Voltage - Supply, Single/Dual (±) |
2.7V~5.5V ±2.5V |
Supply Type |
Dual, Single |
Bandwidth |
155MHz |
Neg Supply Voltage-Nom (Vsup) |
-2.5V |
Turn-Off Delay Time |
130 ns |
Max Dual Supply Voltage |
2.75V |
On-State Resistance (Max) |
4.5Ohm |
Min Dual Supply Voltage |
2.25V |
Dual Supply Voltage |
2.5V |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
60 dB |
Current - Leakage (IS(off)) (Max) |
100pA |
Channel Capacitance (CS(off), CD(off)) |
11pF 11pF |
On-state Resistance Match-Nom |
0.4Ohm |
Switch Circuit |
SPST - NO |
Switch Time (Ton, Toff) (Max) |
20ns, 8ns (Typ) |
Charge Injection |
3pC |
Crosstalk |
-90dB @ 1MHz |
Switch-on Time-Max |
200ns |
Switch-off Time-Max |
190ns |
Height Seated (Max) |
1.2mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADG715BRUZ-REEL7 Overview
Shipping overseas is convenient due to the electrical component's packing in 24-TSSOP (0.173, 4.40mm Width). To ensure high reliability, a new packaging method Tape & Reel (TR) is used. Mounted in Surface Mount is this multiplexer. 1:1 is the ratio of multiplexer to demultiplexer circuits. An extended operating temperature of -40°C~85°C TA degrees Celsius. In total, there are 24 terminations. As a result of its 8 channels, this electronic component provides high-quality output. In the case of a voltage supply of 2.5V volts, the electrical part can be powered up and run. Electronic part bodies are injected with 24 pins. A SPST - NO switching circuit is used to build these analog multiplexers. Using the ADG715 search parameter, you can discover variants of the switch. An switch multiplexer with 4.5Ohm internal resistance has a value of 4.5Ohm. The functions of 24 pins can be found in the datasheets. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. An effective Dual, Single supply digital multiplexer. A low voltage of 2.7V should be applied to the electronic component. This multiplexer would work with 10μA current. If put voltage greater than 20μA on the device, damage may be caused to the analogue multiplexer. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 2.75V. You should attach at least 2.25V voltage if you are using dual power supply. There are 155MHz bandwidths for data transfer.
ADG715BRUZ-REEL7 Features
8 Channels
Switch Circuit: SPST - NO
10μA Supply Current
Bandwidth: 155MHz
ADG715BRUZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG715BRUZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Transmit
- Residential Gateways, Home Gateway/Router
- Digital access cross connects
- Cable Modem
- Industrial and process control systems
- Multiplexers
- Channelized and Unchannelized DS3 applications
- Battery Powered Instruments
- Digital cross connects (DSX-1)
- Public switching systems