ADG719BRT-REEL
| Parameters | |
|---|---|
| Turn On Delay Time | 7 ns |
| Turn-Off Delay Time | 3 ns |
| -3db Bandwidth | 200MHz |
| On-State Resistance (Max) | 4Ohm |
| High Level Output Current | 30mA |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 67 dB |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 7pF |
| On-state Resistance Match-Nom | 0.1Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 7ns, 3ns (Typ) |
| Crosstalk | -82dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 8ns |
| Voltage - Supply, Single (V+) | 1.8V~5.5V |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 4Ohm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 5μW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG719 |
| Pin Count | 6 |
| Number of Outputs | 2 |
| Polarity | Non-Inverting |
| Number of Channels | 1 |
| Voltage | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Power Dissipation | 5μW |
| Max Supply Current | 1μA |
ADG719BRT-REEL Overview
Shipping overseas is convenient due to the electrical component's packing in SOT-23-6. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have a number of circuits 2:1. Temperatures around -40°C~125°C TA are extended for operation. In total, there have been 6 terminations. By its 1 channels, the electronic component provides high-quality output. When a voltage supply of 3V is used, the electronic component should be turned on and run. As part of the design of the 6 series, this electronic part has been incorporated into the system. Multiplexers built on a SPDT switching circuit are built. If you are looking for variants of the digital switch, trying search with ADG719. This digital multiplexer has 4Ohm internal resistance. To find out what the 6 pins do, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. There should be 1.8V voltage fed to the electrical part below 1.8V. Using a single voltage supply, this switch device consumes 1.8V~5.5V volts. A digital multiplexer may suffer damage if voltage is applied above 1μA. The analog switch ics includes 2 outputs.
ADG719BRT-REEL Features
1 Channels
Switch Circuit: SPDT
-3db Bandwidth: 200MHz
ADG719BRT-REEL Applications
There are a lot of Analog Devices Inc. ADG719BRT-REEL Analog Switches & Multiplexers ICs applications.
- Communications systems
- ATM
- Optical Applications
- Precision instrumentation
- Video signal routing
- Data switching
- Microprocessor Controlled Analog Systems
- T1/E1 Terminals
- PBXs
- Existing multiplexer applications (both fault-protected and nonfault-protected)
