Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 4 weeks ago) |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SOT-23-6 |
Number of Pins |
6 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
ECCN Code |
EAR99 |
Resistance |
4Ohm |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
5μW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3V |
Terminal Pitch |
0.95mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
ADG719 |
Pin Count |
6 |
Number of Outputs |
2 |
Polarity |
Non-Inverting |
Power Supplies |
3/5V |
Number of Channels |
1 |
Interface |
Parallel |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1.8V |
Operating Supply Current |
1nA |
Nominal Supply Current |
1μA |
Power Dissipation |
5μW |
Max Supply Current |
1μA |
Turn On Delay Time |
7 ns |
Supply Type |
Single |
Bandwidth |
200MHz |
Turn-Off Delay Time |
3 ns |
On-State Resistance (Max) |
4Ohm |
High Level Output Current |
30mA |
Multiplexer/Demultiplexer Circuit |
2:1 |
Off-state Isolation-Nom |
67 dB |
Current - Leakage (IS(off)) (Max) |
250pA |
Channel Capacitance (CS(off), CD(off)) |
7pF |
On-state Resistance Match-Nom |
0.1Ohm |
Switch Circuit |
SPDT |
Switch Time (Ton, Toff) (Max) |
7ns, 3ns (Typ) |
Crosstalk |
-82dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-off Time-Max |
8ns |
Voltage - Supply, Single (V+) |
1.8V~5.5V |
Max Junction Temperature (Tj) |
150°C |
On-State Resistance |
4Ohm |
Height |
1.45mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADG719BRTZ-500RL7 Overview
Packed in SOT-23-6, the electronic component is convenient for shipping overseas. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. Multiplexer and demultiplexer circuits have a number 2:1. Around -40°C~125°C TA is the extended operating temperature. Totally, there are 6 terminations. A high-quality output is provided by the electrical component's 1 channels. Turning on and running the electrical part should be easy with a 3V voltage supply. This electronic part can be found in the 6 series. On the other hand, analog switches can be constructed using SPDT switching circuits. Try searching for the analog switch ic with ADG719 if you are looking for variants. An switch multiplexer with 4Ohm internal resistance has a value of 4Ohm. Datasheets for 6 pin functions are available upon request. This switch device is a typical Multiplexer or Switches. Users should never supply a voltage higher than 5.5V to a switch device. Analogue multiplexers of the Single supply type that are cost-effective. 1.8V is the lowest voltage the electrical component should receive. 1nA current would be enough for this multiplexer to operate. Draining from a single voltage supply, this analog switch requires a voltage of 1.8V~5.5V. Putting voltage greater than 1μA on the multiplexer may cause damage. A 200MHz-bandwidth can be used for data transfer. 2 outputs are included in the analogue multiplexer.
ADG719BRTZ-500RL7 Features
1 Channels
Switch Circuit: SPDT
1nA Supply Current
Bandwidth: 200MHz
ADG719BRTZ-500RL7 Applications
There are a lot of Analog Devices Inc. ADG719BRTZ-500RL7 Analog Switches & Multiplexers ICs applications.
- Microprocessor Controlled Analog Systems
- Power routing
- Routers
- Audio and video switching
- Battery Powered Instruments
- MP3 players
- High-Voltage
- RGB switches
- Cable PC
- Automotive applications