ADG721BRMZ

14ns, 6ns (Typ) SPST - NO 4Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG721 8 Pins 250pA 3V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG721BRMZ
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 785
Description: 14ns, 6ns (Typ) SPST - NO 4Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG721 8 Pins 250pA 3V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Resistance	4Ohm
Additional Feature	ALSO OPEARTES AT 5 V SUPPLY
Subcategory	Multiplexer or Switches
Max Power Dissipation	5μW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	3V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG721
Pin Count	8
Polarity	Non-Inverting
Power Supplies	3/5V
Number of Channels	2
Interface	Parallel
Max Supply Voltage	5.5V
Min Supply Voltage	1.8V
Operating Supply Current	1nA
Nominal Supply Current	1μA
Power Dissipation	5μW
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	14 ns
Bandwidth	200MHz
Turn-Off Delay Time	6 ns
On-State Resistance (Max)	4Ohm
High Level Output Current	30mA
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	60 dB
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	7pF 7pF
On-state Resistance Match-Nom	0.3Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	14ns, 6ns (Typ)
Charge Injection	2pC
Channel-to-Channel Matching (ΔRon)	300m Ω
Crosstalk	-97dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-off Time-Max	11ns
Voltage - Supply, Single (V+)	1.8V~5.5V
Drain to Source Resistance	4Ohm
Normal Position	NO
Height	850μm
Length	3mm
Width	3mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 4 weeks ago)
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins	8
Operating Temperature	-40°C~85°C TA

ADG721BRMZ Overview

The electronic component is convenient to ship overseas because it is packed in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). High reliability is ensured by the advanced packaging method Tube. In Surface Mount, you'll find this switch device. 1:1 is the ratio between multiplexers and demultiplexers. Around -40°C~85°C TA is the extended operating temperature. A total of 8 terminations have been recorded. Due to its 2 channels, the electrical component produces high-quality output. When the electronic component is given a voltage of 3V, it should be turned on and run. An injection of 8 pins is performed into the body of the electrical component. Circuits based on SPST - NO switching are used to construct these analog switch ics. Look for analog switch ic variants by searching with ADG721. The internal resistance of this digital multiplexer is 4Ohm. For functions related to 8 pins, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. 1.8V is the lowest voltage the electrical component should receive. This multiplexer would work with 1nA current. A voltage of 1.8V~5.5V is required for this switch device, which drains from a single voltage source. Putting voltage greater than 1μA on the multiplexer may cause damage. The data can be transferred over a wide range of bandwidths, called 200MHz bandwidths. Additional features include: ALSO OPEARTES AT 5 V SUPPLY. Drain to Source resistance for this electronic component is 4Ohm.

ADG721BRMZ Features

2 Channels
Switch Circuit: SPST - NO
1nA Supply Current
Bandwidth: 200MHz
Additional Features: ALSO OPEARTES AT 5 V SUPPLY
Drain-to-Source resistance: 4Ohm