Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-WFDFN Exposed Pad, CSP |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Resistance |
4Ohm |
Terminal Finish |
Matte Tin (Sn) |
Additional Feature |
ALSO OPEARTES AT 5 V SUPPLY |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
5μW |
Technology |
CMOS |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
3V |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
ADG722 |
Output |
SEPARATE OUTPUT |
Pin Count |
8 |
Power Supplies |
3/5V |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1.8V |
Power Dissipation |
5μW |
Max Supply Current |
1μA |
Turn On Delay Time |
14 ns |
Number of Inputs |
2 |
Turn-Off Delay Time |
6 ns |
-3db Bandwidth |
200MHz |
On-State Resistance (Max) |
4Ohm |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
60 dB |
Current - Leakage (IS(off)) (Max) |
250pA |
Channel Capacitance (CS(off), CD(off)) |
7pF 7pF |
On-state Resistance Match-Nom |
0.3Ohm |
Switch Circuit |
SPST - NC |
Switch Time (Ton, Toff) (Max) |
14ns, 6ns (Typ) |
Charge Injection |
2pC |
Channel-to-Channel Matching (ΔRon) |
300m Ω |
Crosstalk |
-97dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-off Time-Max |
11ns |
Voltage - Supply, Single (V+) |
1.8V~5.5V |
Normal Position |
NC |
Length |
3mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADG722ACPZ-REEL7 Overview
Packed in 8-WFDFN Exposed Pad, CSP, the electronic component is convenient for shipping overseas. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have a number of circuits 1:1. Operation at a temperature around -40°C~85°C TA. Totally, there are 8 terminations. This electronic part offers high-quality output due to its 1 channels. Turning on and running the electrical part should be easy with a 3V voltage supply. As part of the design of the 8 series, this electronic part has been incorporated into the system. The analog switch ics are built using SPST - NC switching circuits. Using the ADG722 search parameter, you can discover variants of the switch. The internal resistance of this digital multiplexer is 4Ohm. The datasheets for the 8 pins explain the functions. In this analog multiplexer, the value is Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. The lowest voltage the electronic part should receive is 1.8V. This analogue multiplexer requires a voltage of 1.8V~5.5V when it drains from a single voltage supply. Put voltage above 1μA on the multiplexer to cause damage. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. A 2 input needs to be operated. Additional features of the electronic component include: ALSO OPEARTES AT 5 V SUPPLY.
ADG722ACPZ-REEL7 Features
1 Channels
Switch Circuit: SPST - NC
-3db Bandwidth: 200MHz
Additional Features: ALSO OPEARTES AT 5 V SUPPLY
ADG722ACPZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG722ACPZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Power routing
- Avionics test equipment
- Automatic test equipment
- Audio and video signal routing
- Battery-powered systems
- Modems
- Audio signal routing
- Precision test equipment
- Public switching systems
- Access Concentrators