ADG723BRM
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 4Ohm |
| Additional Feature | ALSO OPEARTES AT 5 V SUPPLY |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 5μW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG723 |
| Pin Count | 8 |
| Polarity | Non-Inverting |
| Power Supplies | 3/5V |
| Number of Channels | 2 |
| Interface | Parallel |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Nominal Supply Current | 1μA |
| Power Dissipation | 5μW |
| Max Supply Current | 1μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 14 ns |
| Bandwidth | 200MHz |
| Turn-Off Delay Time | 6 ns |
| On-State Resistance (Max) | 4Ohm |
| High Level Output Current | 30mA |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 60 dB |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 7pF 7pF |
| On-state Resistance Match-Nom | 0.3Ohm |
| Switch Circuit | SPST - NO/NC |
| Switch Time (Ton, Toff) (Max) | 14ns, 6ns (Typ) |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 300m Ω |
| Crosstalk | -97dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 11ns |
| Voltage - Supply, Single (V+) | 1.8V~5.5V |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ADG723BRM Overview
The electronic component is convenient to ship overseas because it is packed in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). The advanced packaging method Tube provides high reliability. In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have a ratio of 1:1. Operation at a temperature around -40°C~85°C TA. There are 8 terminations totally. The electronic part provides high-quality output because it has 2 channels. When the electronic component is given a voltage of 3V, it should be turned on and run. An electrical component like this is included in the 8 series. Multiplexers built on a SPST - NO/NC switching circuit are built. Use ADG723 to search for variants of the digital switches. The internal resistance of this digital multiplexer is 4Ohm. To find out what the 8 pins do, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. Users shouldn't supply more than 5.5V voltage to the switch device. 1.8V is the lowest voltage that should be fed to the electronic electronic part. The voltage required by this switch device is 1.8V~5.5V, draining from a single voltage supply. When the digital multiplexer is charged above 1μA, damage can occur. 200MHz-bandwidths can be used to transfer data between multiplexers. Don't forget the additional features of this electronic part, such as: ALSO OPEARTES AT 5 V SUPPLY.
ADG723BRM Features
2 Channels
Switch Circuit: SPST - NO/NC
Bandwidth: 200MHz
Additional Features: ALSO OPEARTES AT 5 V SUPPLY
ADG723BRM Applications
There are a lot of Analog Devices Inc. ADG723BRM Analog Switches & Multiplexers ICs applications.
- Audio and video signal routing
- Audio signal routing
- Avionics test equipment
- T1/E1 Terminals
- SONET
- Central office
- Avionics
- High speed data transmission line cards
- PDH Multiplexers
- SONET/SDH ADM
