Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 4 weeks ago) |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Resistance |
4Ohm |
Additional Feature |
ALSO OPEARTES AT 5 V SUPPLY |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
5μW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
3V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
ADG723 |
Pin Count |
8 |
Polarity |
Non-Inverting |
Power Supplies |
3/5V |
Number of Channels |
2 |
Interface |
Parallel |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1.8V |
Nominal Supply Current |
1μA |
Power Dissipation |
5μW |
Max Supply Current |
1μA |
Throw Configuration |
SPST |
Turn On Delay Time |
14 ns |
Bandwidth |
200MHz |
Turn-Off Delay Time |
6 ns |
On-State Resistance (Max) |
4Ohm |
High Level Output Current |
30mA |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
60 dB |
Current - Leakage (IS(off)) (Max) |
250pA |
Channel Capacitance (CS(off), CD(off)) |
7pF 7pF |
On-state Resistance Match-Nom |
0.3Ohm |
Switch Circuit |
SPST - NO/NC |
Switch Time (Ton, Toff) (Max) |
14ns, 6ns (Typ) |
Charge Injection |
2pC |
Channel-to-Channel Matching (ΔRon) |
300m Ω |
Crosstalk |
-97dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-off Time-Max |
11ns |
Voltage - Supply, Single (V+) |
1.8V~5.5V |
Drain to Source Resistance |
4Ohm |
Height |
850μm |
Length |
3mm |
Width |
3mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADG723BRMZ Overview
Packed in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width), the electronic component is convenient for shipping overseas. This high-reliability packaging method uses advanced packaging methods Tube. In Surface Mount, this analog switch is mounted. Multiplexer and demultiplexer circuits have a number 1:1. Around -40°C~85°C TA is the extended operating temperature. Total terminations are 8. A high-quality output is provided by the electrical component's 2 channels. Powered by a 3V voltage supply, the electrical part should be switched on and run. 8 pins are injected to the electronic part body. SPST - NO/NC switching circuits are used in these analog switch ics. Using the ADG723 search parameter, you can discover variants of the switch. In this multiplexer, the internal resistance is 4Ohm. For functions related to 8 pins, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. normally, users should not supply switches with voltages higher than 5.5V. It is recommended that the electrical component receives a voltage of 1.8V. This analog switch requires a voltage of 1.8V~5.5V to drain from a single voltage supply. Putting voltage greater than 1μA on the multiplexer may cause damage. In 200MHz-bandwidths, data can be transferred. Don't miss this electronic component's additional features, such as: ALSO OPEARTES AT 5 V SUPPLY. The Drain to Source resistance of this electronic component is 4Ohm.
ADG723BRMZ Features
2 Channels
Switch Circuit: SPST - NO/NC
Bandwidth: 200MHz
Additional Features: ALSO OPEARTES AT 5 V SUPPLY
Drain-to-Source resistance: 4Ohm
ADG723BRMZ Applications
There are a lot of Analog Devices Inc. ADG723BRMZ Analog Switches & Multiplexers ICs applications.
- Transmit
- Digital access cross connects
- SONET
- E1 Multiplexer
- E1 Network Equipment
- Audio and video routing
- PBXs
- Avionics and Military Systems
- Battery-powered systems
- Central office