ADG725BCP
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 48-VFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Packaging | Tray |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Terminal Finish | TIN LEAD |
| Additional Feature | ALSO OPERATE WITH 1.8 V TO 5.5 V SINGLE SUPPLY |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 48 |
| JESD-30 Code | S-XQCC-N48 |
| Operating Temperature (Max) | 85°C |
| Operating Temperature (Min) | -40°C |
| Supply Voltage-Max (Vsup) | 2.75V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 2.25V |
| Number of Channels | 16 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Neg Supply Voltage-Nom (Vsup) | -2.5V |
| On-State Resistance (Max) | 5.5Ohm |
| Off-state Isolation-Nom | 72 dB |
| Neg Supply Voltage-Max (Vsup) | -2.75V |
| On-state Resistance Match-Nom | 0.3Ohm |
| Switch-on Time-Max | 75ns |
| Switch-off Time-Max | 75ns |
| Neg Supply Voltage-Min (Vsup) | -2.25V |
| Height Seated (Max) | 1mm |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | Non-RoHS Compliant |
ADG725BCP Overview
Due to its 48-VFQFN Exposed Pad, CSP packaging, the electronic part is convenient for international shipping. A high level of reliability can be achieved through the use of an advanced packaging method Tray. There is an analog multiplexer mounted in position Surface Mount. Total terminations are 48. The electronic part delivers high-quality output through its 16 channels. A 2.5V voltage supply should turn on and run the electronic component. A total of 48 pins are injected into the electrical part body. Integrated with DIFFERENTIAL MULTIPLEXER analog IC. Check out the electrical component's additional features, such as the following: ALSO OPERATE WITH 1.8 V TO 5.5 V SINGLE SUPPLY. It requires a minimum voltage of 2.25V to supply the switch device. note that this multiplexer can malfunction at temperatures above 85°C. Override -40°C in the operating environment.
ADG725BCP Features
16 Channels
Additional Features: ALSO OPERATE WITH 1.8 V TO 5.5 V SINGLE SUPPLY
ADG725BCP Applications
There are a lot of Rochester Electronics, LLC ADG725BCP Analog Switches & Multiplexers ICs applications.
- PBXs
- CSU
- E1 Network Equipment
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Channel Banks
- Microprocessor Controlled Analog Systems
- Medical Instrumentation
- Fiber to the Home
- Remote Powered Equipment
- Switching Systems
