ADG725BCPZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 48-VFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Resistance | 5.5Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 100μW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADG725 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Channels | 16 |
| Interface | Serial |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Power Dissipation | 100μW |
| Number of Inputs | 32 |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±2.5V |
| Bandwidth | 34MHz |
| Neg Supply Voltage-Nom (Vsup) | -2.5V |
| -3db Bandwidth | 35MHz |
| On-State Resistance (Max) | 5.5Ohm |
| Dual Supply Voltage | 2.5V |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 72 dB |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 13pF 130pF |
| On-state Resistance Match-Nom | 0.3Ohm |
| Charge Injection | 1pC |
| Crosstalk | -72dB @ 1MHz |
| Switch-on Time-Max | 75ns |
| Switch-off Time-Max | 75ns |
| Drain to Source Resistance | 5.5Ohm |
| Height | 830μm |
| Length | 7mm |
| Width | 7mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG725BCPZ Overview
Shipping overseas is convenient due to the electrical component's packing in 48-VFQFN Exposed Pad, CSP. This high-reliability packaging method uses advanced packaging methods Tray. It is mounted in the position Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 16:1. Temperatures around -40°C~85°C TA are extended for operation. The total number of terminations is 48. This electronic part offers high-quality output due to its 16 channels. In the case of a voltage supply of 2.5V volts, the electrical part can be powered up and run. As part of its design, the 48 series is equipped with this electronic component. 2 circuits are used in this analogue multiplexer. ADG725 can be used to search for analog multiplexer variants. There is 5.5Ohm internal resistance in this digital multiplexer. You can find the functions of the 48 pins in the datasheets. normally, users should not supply switches with voltages higher than 5.5V. 1.8V is the lowest voltage that should be fed to the electronic electronic part. Integrated with DIFFERENTIAL MULTIPLEXER analog IC. 5V operating voltages can be used with this electrical part. Among the inputs that can be operated are the 32 inputs. 34MHz bandwidths enable data to be transferred. It has a Drain to Source resistance of 5.5Ohm ohms.
ADG725BCPZ Features
16 Channels
-3db Bandwidth: 35MHz
Bandwidth: 34MHz
Drain-to-Source resistance: 5.5Ohm
ADG725BCPZ Applications
There are a lot of Analog Devices Inc. ADG725BCPZ Analog Switches & Multiplexers ICs applications.
- Frame Relay Equipment
- Relay Replacement
- Ultrasound
- T1/E1 Terminals
- PCMCIA cards
- Fault Tolerant Systems
- Precision test equipment
- Mechanical reed relay replacement
- Medical systems
- Fiber to the Home
