Parameters |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
48 |
ECCN Code |
EAR99 |
Resistance |
5.5Ohm |
Terminal Finish |
Matte Tin (Sn) |
Max Power Dissipation |
100μW |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
2.5V |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
ADG725 |
Pin Count |
48 |
Operating Supply Voltage |
5V |
Number of Channels |
16 |
Interface |
Serial |
Number of Circuits |
2 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1.8V |
Analog IC - Other Type |
DIFFERENTIAL MULTIPLEXER |
Nominal Supply Current |
10μA |
Power Dissipation |
100μW |
Number of Inputs |
32 |
Voltage - Supply, Single/Dual (±) |
1.8V~5.5V ±2.5V |
Bandwidth |
34MHz |
Neg Supply Voltage-Nom (Vsup) |
-2.5V |
-3db Bandwidth |
35MHz |
On-State Resistance (Max) |
5.5Ohm |
Dual Supply Voltage |
2.5V |
Multiplexer/Demultiplexer Circuit |
16:1 |
Off-state Isolation-Nom |
72 dB |
Current - Leakage (IS(off)) (Max) |
250pA |
Channel Capacitance (CS(off), CD(off)) |
13pF 130pF |
On-state Resistance Match-Nom |
0.3Ohm |
Charge Injection |
1pC |
Crosstalk |
-72dB @ 1MHz |
Switch-on Time-Max |
75ns |
Switch-off Time-Max |
75ns |
Height |
1mm |
Length |
7mm |
Width |
7mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 2 weeks ago) |
Mounting Type |
Surface Mount |
Package / Case |
48-TQFP |
Surface Mount |
YES |
Number of Pins |
48 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tray |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
ADG725BSUZ Overview
As the electronic part is packed in 48-TQFP, international shipping is convenient. High reliability is achieved by using advanced packaging method Tray. In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a number of circuits 16:1. The operating temperature is extended to around -40°C~85°C TA. In total, there are 48 terminations. The electronic part delivers high-quality output through its 16 channels. Powered by a 2.5V voltage supply, the electrical part should be switched on and run. Electronic part bodies are injected with 48 pins. The circuits in this analogue multiplexer number 2. Look for analog switch ic variants by searching with ADG725. It has an internal resistance of 5.5Ohm. Please refer to the datasheets for 48 pins functions. Multiplexers should not be powered above 5.5V in normal situations. 1.8V is the lowest voltage the electrical component should receive. It is integrated with a DIFFERENTIAL MULTIPLEXER analog IC. A voltage of 5V can be used to operate the electronic component. It is possible to operate 32 inputs. 34MHz-bandwidths can be used to transfer data between multiplexers.
ADG725BSUZ Features
16 Channels
-3db Bandwidth: 35MHz
Bandwidth: 34MHz
ADG725BSUZ Applications
There are a lot of Analog Devices Inc. ADG725BSUZ Analog Switches & Multiplexers ICs applications.
- Video switching
- Routers
- Multi-Line E1 Interface Cards
- Access Concentrators
- Voice over IP/DSL – Integrated Access Devices, Smart
- Digital Cross-Connects
- Remote wireless modules
- Medical Instrumentation
- T1/E1 Terminals
- Avionics