ADG726BCPZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 48-VFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Resistance | 5.5Ohm |
| Additional Feature | ALSO OPERTES WITH 1.8V TO 5.5V SINGLE SUPPLY |
| Max Power Dissipation | 100μW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADG726 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Channels | 16 |
| Interface | Parallel |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Operating Supply Current | 10μA |
| Power Dissipation | 100μW |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±2.5V |
| Supply Type | Dual, Single |
| Bandwidth | 34MHz |
| Neg Supply Voltage-Nom (Vsup) | -2.5V |
| Turn-Off Delay Time | 16 ns |
| -3db Bandwidth | 35MHz |
| On-State Resistance (Max) | 5.5Ohm |
| High Level Output Current | 30mA |
| Dual Supply Voltage | 2.5V |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 72 dB |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 13pF 130pF |
| On-state Resistance Match-Nom | 0.3Ohm |
| Charge Injection | 1pC |
| Crosstalk | -72dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 37ns |
| Signal Current-Max | 0.03A |
| Height Seated (Max) | 1mm |
| Length | 7mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG726BCPZ-REEL Overview
As the electronic part is packed in 48-VFQFN Exposed Pad, CSP, international shipping is convenient. High reliability is achieved by using advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. Multiplexer and demultiplexer circuits have a number 16:1. Operational temperature extended around -40°C~85°C TA. There are 48 terminations totally. As a result of its 16 channels, this electronic component provides high-quality output. When the electronic component is given a voltage of 2.5V, it should be turned on and run. An injection of 48 pins is performed into the body of the electrical component. There are 2 circuits in this multiplexer. Search with ADG726 if you are looking for analog multiplexer variants. There is 5.5Ohm internal resistance in this digital multiplexer. The datasheets for the 48 pins explain the functions. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. Analog switch ics with Dual, Single supply type are cost-effective. In order for the electronic part to function properly, the lowest voltage should be 1.8V. The analogue multiplexer could operate on 10μA current. Operating voltages range from 5V. 34MHz-bandwidths can be used to transfer data between multiplexers. This electrical component also includes additional features such as ALSO OPERTES WITH 1.8V TO 5.5V SINGLE SUPPLY.
ADG726BCPZ-REEL Features
16 Channels
10μA Supply Current
-3db Bandwidth: 35MHz
Bandwidth: 34MHz
Additional Features: ALSO OPERTES WITH 1.8V TO 5.5V SINGLE SUPPLY
ADG726BCPZ-REEL Applications
There are a lot of Analog Devices Inc. ADG726BCPZ-REEL Analog Switches & Multiplexers ICs applications.
- 65 V DACs
- Audio and video switching
- Avionics
- Multiplexers
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Wireless Local Loop
- Fiber In The Loop (FITL)
- Industrial
- High-Voltage
- Microprocessor controlled systems
