banner_page

ADG726BSUZ-REEL

5.5Ohm QUAD Analog Switches BREAK-BEFORE-MAKE ADG726 48 Pins 250pA 2.5V 48-TQFP


  • Manufacturer: Analog Devices Inc.
  • Nocochips NO: 84-ADG726BSUZ-REEL
  • Package: 48-TQFP
  • Datasheet: PDF
  • Stock: 346
  • Description: 5.5Ohm QUAD Analog Switches BREAK-BEFORE-MAKE ADG726 48 Pins 250pA 2.5V 48-TQFP(Kg)

Details

Tags

Parameters
Bandwidth 34MHz
Neg Supply Voltage-Nom (Vsup) -2.5V
Turn-Off Delay Time 16 ns
On-State Resistance (Max) 5.5Ohm
Dual Supply Voltage 2.5V
Multiplexer/Demultiplexer Circuit 16:1
Off-state Isolation-Nom 72 dB
Current - Leakage (IS(off)) (Max) 250pA
Channel Capacitance (CS(off), CD(off)) 13pF 137pF
On-state Resistance Match-Nom 0.3Ohm
Charge Injection 1pC
Crosstalk -72dB @ 1MHz
Switching BREAK-BEFORE-MAKE
Switch-on Time-Max 37ns
Signal Current-Max 0.03A
Length 7mm
RoHS Status ROHS3 Compliant
Lead Free Contains Lead
Factory Lead Time 1 Week
Lifecycle Status PRODUCTION (Last Updated: 2 weeks ago)
Mounting Type Surface Mount
Package / Case 48-TQFP
Surface Mount YES
Number of Pins 48
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
JESD-609 Code e3
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 48
ECCN Code EAR99
Resistance 5.5Ohm
Terminal Finish Matte Tin (Sn)
Max Power Dissipation 100μW
Technology CMOS
Terminal Position QUAD
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 2.5V
Terminal Pitch 0.5mm
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number ADG726
Pin Count 48
Qualification Status Not Qualified
Operating Supply Voltage 5V
Number of Channels 16
Interface Parallel
Number of Circuits 2
Max Supply Voltage 5.5V
Min Supply Voltage 1.8V
Operating Supply Current 10μA
Power Dissipation 100μW
Logic Function Multiplexer
Number of Inputs 32
Voltage - Supply, Single/Dual (±) 1.8V~5.5V ±2.5V
Supply Type Dual, Single

ADG726BSUZ-REEL Overview


Shipping overseas is convenient with the electronic component packed in 48-TQFP. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). The multiplexer is located in Surface Mount. There is 16:1 ratio between the number of multiplexers and demultiplexers. The operating temperature is extended to around -40°C~85°C TA. Totally, there are 48 terminations. Due to its 16 channels, the electrical component produces high-quality output. In the case of a voltage supply of 2.5V volts, the electrical part can be powered up and run. A total of 48 pins are injected into the electrical part body. It consists of 2 circuits. Try searching for the analog switch ic with ADG726 if you are looking for variants. This digital multiplexer has 5.5Ohm internal resistance. The datasheets for the 48 pins explain the functions. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. Analog switch ics with Dual, Single supply type are cost-effective. 1.8V is the lowest voltage the electrical component should receive. An operating current of 10μA would be sufficient for this switch device. 5V operating voltages are supported by the electronic component. Among the inputs that can be operated are the 32 inputs. The transfer of data can be performed over 34MHz bandwidths.

ADG726BSUZ-REEL Features


16 Channels
10μA Supply Current
Bandwidth: 34MHz

ADG726BSUZ-REEL Applications


There are a lot of Analog Devices Inc. ADG726BSUZ-REEL Analog Switches & Multiplexers ICs applications.

  • Relay Replacement
  • Relay replacements
  • DSLAMs
  • Remote Powered Equipment
  • Medical Instrumentation
  • CSU
  • Microwave transmission systems
  • Cell phones
  • Ultrasound
  • Battery-powered systems

Write a review

Note: HTML is not translated!
    Bad           Good