ADG728BRUZ

95ns, 85ns (Typ) 4.5Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG728 16 Pins 100pA 3V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG728BRUZ
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 985
Description: 95ns, 85ns (Typ) 4.5Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG728 16 Pins 100pA 3V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 1 month ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	4.5Ohm
Subcategory	Multiplexers or Switches
Max Power Dissipation	100μW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG728
Pin Count	16
Power Supplies	3/5V
Number of Channels	8
Interface	2-Wire, Serial
Number of Circuits	1
Max Supply Voltage	5.5V
Min Supply Voltage	2.7V
Analog IC - Other Type	AUDIO/VIDEO SWITCH
Operating Supply Current	10μA
Nominal Supply Current	20μA
Power Dissipation	100μW
Max Supply Current	20μA
Number of Bits	8
Throw Configuration	DPST
Turn On Delay Time	95 ns
Bandwidth	65MHz
Turn-Off Delay Time	85 ns
On-State Resistance (Max)	4.5Ohm
High Level Output Current	120mA
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	55 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	13pF 85pF
On-state Resistance Match-Nom	0.4Ohm
Switch Time (Ton, Toff) (Max)	95ns, 85ns (Typ)
Charge Injection	3pC
Crosstalk	-75dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	200ns
Voltage - Supply, Single (V+)	2.7V~5.5V
Drain to Source Resistance	2.5Ohm
Height	1.05mm
Length	5mm
Width	4.4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG728BRUZ Overview

Shipping overseas is convenient due to the electrical component's packing in 16-TSSOP (0.173, 4.40mm Width). This high-reliability packaging method uses advanced packaging methods Tube. There is an analog multiplexer mounted in position Surface Mount. 8:1 is the ratio between multiplexers and demultiplexers. The operating temperature is extended to around -40°C~85°C TA. The total number of terminations is 16. As a result of its 8 channels, this electronic component provides high-quality output. An 3V voltage supply should allow the electrical part to be turned on and run. This electrical component is included in the 16 series of products. It consists of 1 circuits. Search with ADG728 if you are looking for analog multiplexer variants. There is 4.5Ohm internal resistance in this digital multiplexer. To find out what the 16 pins do, please refer to the datasheets. It is a typical Multiplexers or Switches analog multiplexer. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. It is recommended that the electrical component receives a voltage of 2.7V. This digital switch can be operated with a current of 10μA. This analogue multiplexer requires a voltage of 2.7V~5.5V when it drains from a single voltage supply. If put voltage greater than 20μA on the device, damage may be caused to the analogue multiplexer. Integrated with AUDIO/VIDEO SWITCH analog IC. A 65MHz-bandwidth can be used for data transfer. Resistivity from Drain to Source is 2.5Ohm for this electronic part. The switch device is capable of conducting in a 8-bit mode.