ADG728BRUZ-REEL
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 4.5Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexers or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADG728 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 3/5V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Analog IC - Other Type | AUDIO/VIDEO SWITCH |
| Number of Bits | 8 |
| Throw Configuration | DPST |
| -3db Bandwidth | 65MHz |
| On-State Resistance (Max) | 4.5Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 13pF 85pF |
| On-state Resistance Match-Nom | 0.4Ohm |
| Switch Time (Ton, Toff) (Max) | 95ns, 85ns (Typ) |
| Charge Injection | 3pC |
| Crosstalk | -75dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 200ns |
| Voltage - Supply, Single (V+) | 2.7V~5.5V |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ADG728BRUZ-REEL Overview
The electrical component comes in 16-TSSOP (0.173, 4.40mm Width) packaging, which makes it convenient to ship overseas. The advanced packaging method Tape & Reel (TR) provides high reliability. Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have a number of circuits 8:1. Extended operating temperature around -40°C~85°C TA. Total terminations are 16. The electronic part provides high-quality output because it has 8 channels. It is safe to turn on and run the electronic component with a 3V voltage supply. It is injected into the electrical part body with 16 pins. A 1 circuit is present in this switch device. Try searching with ADG728 to find analog multiplexer variants. A 4.5Ohm internal resistance characterizes this multiplexer. For details about the functions of 16 pins, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexers or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. 2.7V is the lowest voltage that should be fed to the electronic electronic part. Using a single voltage supply, this switch device consumes 2.7V~5.5V volts. Integrated with AUDIO/VIDEO SWITCH analog IC. Its conductivity is 8-bit.
ADG728BRUZ-REEL Features
8 Channels
-3db Bandwidth: 65MHz
8-Bit
ADG728BRUZ-REEL Applications
There are a lot of Analog Devices Inc. ADG728BRUZ-REEL Analog Switches & Multiplexers ICs applications.
- Avionics
- Digital Cross-Connects
- High reliability control systems
- Automotive applications
- Battery Powered Instruments
- Isolation
- SONET
- Microprocessor controlled systems
- New designs requiring multiplexer functions
- DSLAMs
